4.5.4 Assembly of cable channels surface mounted version
1.
First mount the bottom channels (1) at the floor using the supplied anchors.
Figure 4.16 Cable channels surface mounted version
2.
Place the covers (2) at the stated positions.
3.
Fasten the covers (3) using the anchors. The covers (4) can be fastened below the
bolts (5).
4.5.5 Assembly of cable channels flush mounted version
1.
Fasten the covers (1) to the concrete using anchors.
2.
Fasten the covers (2) below the bolts (3). In case there is one great recess in the
floor, the supplied cable channels (4) and (5) can be used between the tracks.
Operation & maintenance instructions (Version H)
46
Assembling main parts
SKY-200/250