Indicators - Omron SYSMAC LINK C1000H-SLK21-V1 System Manual

Indicators

2-3

Indicators

C1000H-SLK11 C1000H-SLK21-V1
RUN P/S
ERC ERH
INS M/S
SD RD
TS LNK
Indicator
Name Color
RUN Green
P/S Green
(power supply on,
optical units only)
ERC Red
(communications
error)
ERH (PC error) Red
INS (Network Orange
inclusion)
M/S (polling unit) Orange
SD (transfer) Orange
RD (receive) Orange
TS (test) Orange
LNK (data link) Orange
The status of the SYSMAC LINK Unit is indicated by the indicators shown below.
The Units that use coaxial cables (C1000H-SLK21-V1 and C200HW-SLK23/24)
are not equipped with the P/S indicator.
RUN
ERC ERH
INS M/S
SD RD
TS LNK
Condition
Lit Unit is operating normally.
Not lit Watchdog timer error has occurred.
Lit Power is being supplied from the Auxiliary Power Supply Unit.
Not lit Power is not being supplied from the Auxiliary Power Supply Unit.
Lit Communications error has occurred, node number setting is incorrect,
or same node number has been set twice.
Not lit None of the above errors has occurred.
Lit PC CPU, PC model, PC version, PC interface, or EEPROM error has
occurred.
Not lit None of the above errors has occurred.
Lit Unit is part of Network.
Not lit Unit is not part of Network.
Lit Unit is polling unit.
Not lit Unit is not part of Network or is polled unit.
Lit Unit is sending data.
Not lit Unit is not sending data.
Lit Unit is receiving data.
Not lit Unit is not receiving data
Lit Test is being executed.
Flashing Test setting error has occurred.
Not lit Test is not being executed.
Lit Unit is part of active data link.
Flashing Data link error has occurred.
Not lit Unit is not part of active data link.
C200HW-SLK13/14 C200HW-SLK23/24
RUN
P/S
ERC ERH
TS
INS M/S
LNK
SD RD
Meaning
Section 2-3
RUN
ERC ERH
TS
INS M/S
LNK
SD RD
13