Table of Contents
Advertisement
Operation
Set ink type
Depending on the application is the use of a specific ink type necessary. The different
characteristics of the inks need an individual setting of the Markoprint X4JET.
If LX print heads are used, the ink type will be detected by the control system
automatically and takes the ink specific settings.
The automatic setting of the ink type works only with ink cartridges sold by Weber
Marking Systems!
Ink cartridges, which are not distributed by Weber Marking Systems will not
supported by the print heads.
If HP print heads are used, the setting must be done from the user directly on the
Markoprint X4JET control system. Therefore the Markoprint X4JET have under the menu
item select ink type the possibility to choose basic settings. Certainly it's necessary to
adapt special settings, dependent on the application.
To set the ink type:
1.
Touch the iLOGIK in one of the status menu.
The print image submenu is displayed.
2.
Call the System submenu by rotating the iLOGIK and select it by pressing.
The Time / Date submenu is displayed.
3.
Call the Select ink type submenu by rotating the iLOGIK and select it by pressing.
4.
Set the favoured ink type by rotating the iLOGIK and confirm it by pressing.
Select language
To set the language,
1.
Touch
the
The print image submenu is displayed.
2.
The
System
The Time / Date submenu is displayed.
3.
Call the Language submenu by rotating the iLOGIK and select by pressing.
4.
Set the favored Language by rotating the iLOGIK and confirm it by pressing.
iLOGIK
in
submenu
by rotating
Seite 105 von 177
one
of
the
the iLOGIK and select it by pressing.
72800115 Markoprint X4JET
status
menu.
GB
Advertisement
Table of Contents
