Table of Contents
Advertisement
Operation
Display
Menu
Encoder
Intensity
Zoom
Direction
Nozzle
Upside down
Head
adjustment
Service
Reset ink
counter
Purge
Description
When the rotary encoder is connected the pulse per inch can be
set to synchronise the printing speed.
NOTE: This menu is only available if Encoder Intern is set in the
menu.
Chapter speed, Page 89
The contrast of the print image can be set in the print intensity
menu. A higher intensity gives greater blackening and longer ink
drying time.
In the print width menu point, the number of pixels is increased or
reduced. The print image is therefore made wider or narrower.
In the case of barcodes, make sure that the change takes place in
the correct proportion.
Chapter zoom, Page 93
The parameter print direction indicates the direction of movement
of the product on the conveyor belt viewed from the controller in
the print direction.
Chapter Print direction, Page 94
Each ink cartridge has two rows of nozzles (A and B), for which
different settings can be made in the Nozzle Menu.
HINWEIS: Only available for HP print heads.
Chapter nozzle rows, Page 94
The setting Upside Down causes the print image to be printed
upside down.
Chapter Upside down
, Page 95
The
setting
head
imprecisions by multi head applications.
Chapter Head adjustment, Page 96
The settings ink counter, Purge nozzles and Nozzle heating can
be made in the service menu.
This function causes the ink level to be reset after inserting a new
cartridge. (Print head specific)
Chapter Reset ink counter, Page 97
During the purging process ink is ejected from all the nozzle
ducts.
WARNING: Protect the environment from pollution!
Chapter To rinse the nozzles manually, Page 98
Seite 84 von 177
72800115 Markoprint X4JET
adjustment
compensated
mechanical
GB
Advertisement
Table of Contents
