Table of Contents
Advertisement
Operation
Reset ink counter
The reset of the ink counter is only possible for using HP print heads. In LX
cartridges the ink level is detected automatically. This menu isn't available by
using MX print heads.
Reset the ink counter after inserting a new ink cartridge.
Each ink cartridge is displayed in main menu with its current ink level as a percentage.
Instruction
Please reset the ink counter as follows:
Step
1
2
3
In Lexmark cartridges, the ink level is stored in an internal memory of the cartridge and
does not need a reset if new cartridge is used.
The controller knows the current ink level of the cartridge. The ink is stored in 7%
increments. The exactly value of the actual used cartridge will be saved in the control
system related to the print head module. This can result an inaccuracy by an inserting in
different print head modules.
The automatic storage of ink level only works with distributed Ink cartridges by
Weber Marking Systems.
Only Ink cartridges by Weber Marking Systems are supported by the print heads.
Calculate ink content HP cartridge
A HP ink cartridge contains 42 ml of ink, equivalent to 1.26 billion ink droplets of approx.
33 pl each. The system counts the ink droplets printed and uses this to calculate the ink
consumption.
This function is only correct if the ink meter is reset when a new HP ink cartridge is
inserted.
The ink content can also be determined by weighing:
A full HP cartridge weighs approx. 110 g ± 3 g. An empty cartridge weighs approx. 70 g
± 5 g. The residual ink in an empty cartridge is 3 ml max.
Procedure
Call up the ink menu by pressing the ink key
Call up the submenu Ink reset by pressing the navigation key
Set the value to „YES" by pressing the navigation keys
with
.
Seite 97 von 177
72800115 Markoprint X4JET
..
.
and confirm
GB
Advertisement
Table of Contents
