Table of Contents
Advertisement
Installation and initial operation
The correct place of an ink cartridge is also shown on the display below status
menu 1. The LED on the LX print head changes from red to green if the cartridge is
inserted correctly.
Remove the LX ink cartridge from the print head:
1.
Swing the clamp lever to open it.
2.
Pull the ink cartridge in the direction of the clamp lever and remove it upwards.
Fig. 32: Display change with correct inserted cartridge
Seite 65 von 177
72800115 Markoprint X4JET
Fig. 33:Remove LX ink cartridge
GB
Advertisement
Table of Contents
