Table of Contents
Advertisement
Operation
NonStopPrinting
With the use of a NonStopPrinting print head (NSP head) it's possible to print without
interruptions.
The NSP head consists of 2 cartridges, each of them print on the same position. If one
cartridge is empty or is to be cleaned, the other cartridge prints continuously.
Description:
Each print head consists of two cartridge holders, which are controlled alternately. Both
cartridges are so driven that they print on the same position of the product.
The cartridges have 100% ink capacity at the installation. The first cartridge prints two
times successive, the second cartridge prints once alternately, so that both cartridges
aren't empty simultaneously. The alternately printing at the rate of 1:2 prevents a drying
up of the cartridges. If the cartridge with the higher print volume is empty, a warning will
be displayed and the other cartridge prints continuously from now until a new cartridge is
replaced. The new cartridge prints now in a less volume than the other cartridge, so this
needs to be replaced next.
The print head is wider by the double cartridge holder (ca. 68 mm) as a normal print
head (ca. 34 mm).
In addition to a NSP Single print head with a print height of 12,5 mm there is also a NSP
Twin print head with a print height of 25 mm. I.e. at a Markoprint X4JET can connect one
or two NSP Single print heads or one NSP Twin print head.
HP and LX NSP print heads are available.
Print systems of customer can be operated
the NonStopPrinting function by an elimination of production downtimes. Services and
repairs of defect print heads can be done during the running production.
efficiently and economically
Seite 108 von 177
72800115 Markoprint X4JET
Fig. 42: Example for a NSP Single print head LX
with the use of
GB
Advertisement
Table of Contents
