Table of Contents
Advertisement
General
Technical terms
Print start delay
Print width
Product sensor
Q
R
S
Sensor
Shaft encoder
T
TIJ
Trident
U
V
W
Description
Offset print, i.e. by how much is printing delayed in millimetres
after the product is detected by the light barrier.
The number of pixel can be increased or decreased using this
parameter. The print image becomes narrower or wider.
A sensor for the detection of the product. Mostly used are optical
sensors (photo sensor, light barrier, reflex sensor)
See product sensor
If a shaft encoder is connected to the controller, the print speed
is automatically matched to the conveyor belt speed through the
impulses of the rotary encoder.
Thermal Ink JET print function of the HP cartridges
Manufacturer of the MX Piezo print heads
Seite 12 von 177
72800115 Markoprint X4JET
GB
Advertisement
Table of Contents
