Upside Down - Weber Markoprint X4JET Manual For Installation, Operation And Maintenance

Operation
Activate the nozzle rows as follows:
Nozzle Description
row
A ~ B Printing with both nozzle rows, alternating. The first print image is printed
with nozzle row A and the second text with nozzle row B. Vertical
resolution: 300 dpi
A + B Printing with both nozzle rows together. Vertical resolution: 600 dpi
A Printing only with nozzle row A. Vertical resolution: 300 dpi
B Printing only with nozzle row B. Vertical resolution: 300 dpi
With setting A + B, the print speed must be accurately set, to produce a good print
result. Otherwise the print image is blurred.
To select the nozzle row proceed as follows:
1. Touch the iLOGIK once in one of the status menus.
The Label submenu is displayed.
2. Call the Parameter submenu by rotating the iLOGIK and select by pressing.
The Print Delay submenu is displayed.
3. Call the Nozzle submenu by rotating the iLOGIK and select by pressing.
The Nozzle submenu is displayed.
4. Make the desired setting by rotating the iLOGIK and select by pressing.
In the Hi-Speed mode (only X4JET Pro version) the setting of the nozzle rows A~B
cannot vary!

Upside down

1. Touch the iLOGIK once in one of the status menus.
The Label submenu is displayed.
2. Call the Parameter submenu by rotating the iLOGIK and select by pressing.
The Print Delay submenu is displayed.
3. Call the Upside Down submenu by rotating the iLOGIK and select by pressing.
The Upside Down submenu is displayed.
4. Make the desired setting by rotating the iLOGIK and select by pressing.
Seite 95 von 177
72800115 Markoprint X4JET
GB