Quick Reference Operating Instructions; Daily Start-Up Procedure - Kodak X-OMAT 7000 User Manual

2

Quick Reference Operating Instructions

Daily Start-Up Procedure

7E6174 – 16FEB01
Warning
• Move the 2 Circuit Breakers (Loader and Processor) on the back of the
Multiloader 7000 to the "0" position.
• Always disconnect the Multiloader main power (either the mains plug, grasp the
mains plug only, or move the wall-mounted main switch to the "0" position) before
performing any of the following procedures.
• Only Kodak trained personnel can perform the following procedures.
• Wear rubber gloves, safety glasses, and protective clothing when doing any
maintenance procedures. Report any change in the operating condition of the
Processor to your Kodak Service Representative.
• Reliable operation of the Processor requires that you clean all parts correctly. More
frequent maintenance may be necessary due to site conditions or actual usage. For
monthly and quarterly maintenance, contact your trained Kodak Service
Representative.
Quick Reference Operating Instructions
2–1