Failures Not Detected By The Multiloader - Kodak X-OMAT 7000 User Manual

Failures Not Detected by the Multiloader

7E6174 – 16FEB01
Only the following few errors are not detectable by the Multiloader:
Error
Wrong Film
Message
TYPE 1 film loaded in a
TYPE 2 coded Cassette
CAUSES
Is the correct size displayed by the Multiloader?
Are all magazines seated correctly?
Move Magazine to another level. By moving the
Magazine to another level, the problem of the wrong
size detection might be solved, although there is a
failure in the size direction. Inform your Kodak
Service Representative of this failure.
The magazine detection is correct; are the Cassette
sizes correct?
The Cassette edges may be damaged. Ask your
Kodak Service Representative to check your
Cassette.
Are the reflectors on the cassette dirty or damaged?
If so, replace Reflectors.
If not, call your Kodak Service Representative. In
the meantime, use the soft key for TYPE 2 selection.
Key Operator Instructions
5–11