Unload Only - Kodak X-OMAT 7000 User Manual

Unload Only

7E6174 – 16FEB01
4. Insert an empty Cassette.
• The Multiloader checks whether a film is in the Cassette. If the Cassette
contains a film, a message is displayed and an audible alarm sounds. The film
is transported to the Processor and the Cassette loaded. Press CLEAR to stop
the alarm.
• The Cassette is loaded as requested.
GREEN CASSETTE WAS NOT EMPTY
ON
ORANGE
Flashing RED
CLEAR
"BEEP"
H186_8509AC
Use "Unload Only" to remove the film from a Cassette and not reload the film.
1. Start at the "Ready Status" on the Display Panel.
2. Press Unload.
The following is displayed.
ON GREEN UNLOAD ONLY
ORANGE
RED
H186_8510AC
3. Insert a Cassette
• The Cassette is returned either with the Latch open or closed, depending on
how it has been set at installation by the Kodak Service Representative.
• If the Cassette is inserted empty for Unload Only, a message is displayed and
an audible alarm sounds. Press CLEAR to stop the alarm.
CODE RETURN
CLEAR
Overview
3–9