Key Operator Instructions
Filling the Processor Tanks
5–18
TANK FILL MODE is used to fill the Processor Tanks automatically. In this mode
the Processor Tanks fill with solution from the Replenishment Tanks until the Level
Sensors detect that the Processor tanks are full.
Warning
• Move the Circuit Breakers (Loader and Processor) on the back of the Multiloader
to the "0" position.
• Always disconnect the main power (either the mains plug, grasp the mains plug
only, or move the wall-mounted main switch to the "0" position) from the
Multiloader.
H186_1108GC
O N
O N
F
O F
Loader
Processor
16FEB01 – 7E6174