Operating The Archive Processor; Attaching Film To A Take-Up Reel; Using A Trailer Holder - Kodak Prostar Operator's Manual

Operating the Archive Processor

Attaching film to a
take-up reel

Using a trailer holder

A-62051 May 2008
As processed film exits the Archive Processor, you must attach it to a
take-up reel. There are different ways to attach film to a take-up reel,
depending on the type of reel you are using. One way is to use a trailer
holder (snubber). Another way is to wrap the film around the center of
the reel. Both ways are described in this section.
NOTE: Kodak no longer supplies this reel with a separate trailer hold.
Kodak supplies only the integral film cinch pin as shown below.
1. Wrap the film counterclockwise around a trailer holder (snubber).
2. Wrap the film around the trailer holder one more time.
3. Insert the trailer holder (snubber) in the core of the take-up reel.
4. Insert the film in the slot of the take-up reel.
Slot
Trailer Holder
Film Reel
Film
15