Table of Contents
Advertisement
Troubleshooting and Error Messages
Error Messages
6–10
Message
Exposed film not removed. Please check
cassette in darkroom.
Cassette was not empty. Exposed film
was removed.
Magazine for serial unloading not
defined.
Please insert correct cassette size XX
YY
Exposed film not removed. Please re-
enter cassette.
Film size/type not available.
Film size/type not available. magazine
XX * YY
Please check correct magazine insertion. The magazine is probably not positioned correctly.
Please insert correct cassette size.
Remove and check magazine.
Please riffle films in magazine.
Please check cassette in darkroom.
Description
The Cassette may be empty and you did not
choose the LOAD ONLY mode. The machine
feeds the Cassette back, because a film could be
sticking to the upper screen.
The special function LOAD ONLY was selected,
but a film was in the Cassette when it was entered.
During SERIAL UNLOADING a Cassette
containing a film was inserted.
The magazine for SERIAL UNLOADING was
not defined.
The Cassette entered was incorrect for SERIAL
UNLOADING.
Cassette was incorrectly inserted. If the message
appears repeatedly, check the Cassette in the
darkroom. If there is no film in the Cassette, have
it checked by your Kodak Service Representative.
The chosen magazine is not available or used for
SERIAL UNLOADING.
The chosen magazine was empty when Cassette
was inserted. The Cassette is RETURNED (with
latch open or closed, depending on how it has been
set on installation), as no film was loaded.
SERIAL UNLOADING. The Cassette was
unloaded and reloaded.
No film was removed from the magazine or the
Magazine Cover did not completely close. To
correct, press CLEAR, the same message will
appear on the screen again. You can now press the
Magazine Door button and open the Magazine
Door.
Note
This is the only time you can open the Magazine
Door when the red light is on.
Remove the Magazines and check that the
Magazine Covers are closed and latched. If the
Magazine Cover is not closed, it is because a Film
is caught in the Cover, and all of the films may be
fogged. If necessary, reload the Magazine with
unexposed film. Install the Magazines all the way
into the Magazine Drawer. Close the Magazine
Door and press CLEAR. Resume normal
operation.
The films in the magazine adhere to each other, so
that no single sheet of film can be removed from
the magazine. In the darkroom, remove and riffle
the films before reloading the magazine.
a. If there is no film in the Cassette ask your
Kodak Service Representative to check the
Cassette.
b. If there is a film in the Cassette, the Cassette
is likely to have contained two films and one
was removed in the Multiloader.
16FEB01 – 7E6174
Advertisement
Table of Contents
