Removing A Magazine - Kodak X-OMAT 7000 User Manual

Removing a Magazine

7E6174 – 16FEB01
You can remove a Magazine using the Front Door Release located under the Top
Cover of the Multiloader and/or the Manual Magazine Door Opener.
Warning
• Move the Circuit Breakers (Loader and Processor) on the back of the Multiloader
to the "0" position.
• Always disconnect the main power (either the mains plug, grasp the mains plug
only, or move the wall-mounted main switch to the "0" position) from the
Multiloader.
H186_1108GC
Important
You must push in on the Magazine Door while pulling the Front Door Release.
1. Loosen both Captive Screws 1/4 turn counterclockwise.
Warning
The Top Cover must engage both Cover Stays.
2. Lift and open the Top Cover.
Troubleshooting and Error Messages
O N
O N
F
O F
Loader Processor
6–7