KEB COMBIVERT R6-S Instruction Manual page 17

Temperature
Climate
Mechanical
Contamination
Ambient conditions during transport
Temperature
Climate
Mechanical
Contamination
Solids
Ambient conditions for the storage
Temperature
Climate
Mechanical
Contamination
Type of protection
Environment
Definition according to
EMC emitted interference
Cable-based interferences
Radiated interferences
Interference immunity
Electro-static discharge EN 61000-4-2
Burst - control lines + bus EN 61000-4-4
Burst - mains supply EN 61000-4-4
Surge - mains supply EN 61000-4-5
Immunity to conducted
disturbances,
induced by radio-frequency
Electromagnetic fields EN 61000-4-3
Voltage variation/
voltage drop
Voltage unsymmetries/
frequency changes
Standard
Humidity
EN 60721-3-3
Vibration
Gas
Solids
Humidity
Vibration
EN 60721-3-2
Surge
Gas
Humidity
Vibration
EN 60721-3-1
Surge
Gas
Solids
EN 60529
IEC 664-1
EN 61800-3
–
–
EN 61000-4-6
fields
EN 61000-2-1
EN 61000-2-4
Technical Data
Standard/
class
(with temperature over 45°C to max. 55°C
3K3
a derating of 5 % per 1 K must be taken into
3K3 5...85 % (without condensation)
max. amplitude of a vibration 1 mm
max. acceleration amplitude 7 m/s²
3M1
3C2
3S2
2K3
2K3
max. vibration amplitude 3.5 mm (2...9 Hz)
max. acceleration amplitude 15 m/s² (9...200 Hz)
2M1
2M1
2C2
2S2
1K4
1K3
max. amplitude of a vibration 1 mm
1M1
max. acceleration amplitude 7 m/s² (13...200 Hz)
1M1
1C2
1S2
IP20
Inverter product standard: EMC
C2 with filter (only with ferrite rings)
C2 with filter (only with ferrite rings)
8 kV AD (air discharge) and CD (contact dis-
2 kV
4 kV
1 / 2 kV Phase-phase / phase-ground
10 V 0.15-80 MHz
10 V/m
Instructions
extended to -10...45 °C
consideration)
(5...13 Hz)
(13...200 Hz)
(without condensation)
max. 100 m/s²; 11 ms
(without condensation)
(5...13 Hz)
max. 100 m/s²; 11 ms
Pollution degree 2
charge)
+10 %, -15 %; 90 %
3 %; 2 %
GB - 69