KEB COMBIVERT R6-S Instruction Manual page 11

Safety Instructions
When doing an insulation or voltage measurement in accordance with EN 60204-
1 / VDE 0113-1, the power semiconductor of the unit and existing radio interfer-
ence filters must be disconnected because of the danger of destruction. This
Insulation
is permissible in compliance with the standard, since all inverters are given a
measure-
high voltage test in the end control at KEB. In the case of special requirements
ment
please contact KEB.
When using components without isolated inputs/outputs, it is necessary that
equipotential bonding exists between the components to be connected (e.g.
Different
through the equalizer). Disregard can cause destruction of the components by
earth po-
the equalizing currents.
tentials
GB - 63