Connections Of The Control Board; Connection Of The Synchronization Unit - KEB COMBIVERT R6-S Instruction Manual

6.3.4

Connections of the control board

Mains contactor (AC15: 6A 230V AC / DC13:
X1B
6A 24V DC) and connection precharging
X2B Connection for synchronization line
X2C Activation of the line contactor self-holding
X4B HSP5 operator interface
X2A Control terminal strip
Figure 31:
6.3.5

Connection of the synchronization unit

RJ45 socket for phase synchroni-
zation and temperature sensor
Figure 32:
X2B
X1B
Connection terminals of the control board
X2B
1 8
RJ45 socket for phase synchronization and temperature sensor
Connection of the COMBIVERT R6
X2C X2A.10...23
No direct PC connection
Install control and mains cable separately !
No. Name
X2B.1 t1
X2B.2 t2
X2B.3 U13_syn Synchronization phase 1 / 3
X2B.4 –
X2B.5 U21_syn Synchronization phase 2 / 1
X2B.6 –
X2B.7 U32_syn Synchronization phase 3 / 2
X2B.8 –
X4B
X2A.24...29
Supply voltage potential !
Function
Connection for temperature sensor
(option)
reserved
reserved
reserved
GB - 79