Table of Contents
Advertisement
For all SYSTEM MODES other the SPLIT, the VSP 628PRO will show "SYSTEM MODE SETTING...", which will take
up to 30secs before the device is ready.
Single Image Switching
VSP 628PRO can realize seamless effects switching between two channels.
Push the signal button, and the signal will be switched to the output.
For example, the [SDI1] button light is on, it means the signal of output is SDI1, if user needs to switch to VGA
signal, push the [VGA] button, and the signal will be seamless cut or fade in fade out to the output. User can
adjust the switch speed in <Trans Time> option in <Transition>by pushing the [MENU] button.
PIP Setting
Enable the PIP function
VSP 628PRO supports seamless switch in single image and double images.
Push the [PIP] button, the button light is on, and enable the PIP function.
Select the signal in PIP
VSP 628PRO can output two same or different signals to the output, the settings are as follows:
1. Push the [PIP] button, and enable the PIP function.
2. Push the [SCALE] or [DIMMER] button, select <Layer Select>, and push the rotary knob to confirm. (User can
also select <Layer Select> in <Input> or <Output> option by pushing the [MENU] button.
3. Turn the rotary knob, and select main or sub image.
4. Select the signal, and the selected image will be switched to this signal.
Scale Setting
1. Push the [SCALE] button, and enter to the scale function menus.
2. Adjust the H size, V size, H/V size, H pos, V pos and scaling mode by turning the rotary knob or number
buttons.
3. If image quality distorts by improper operation, it can be recover by reset.
Image Size Setting
1. Push the [MENU] button, and enter to the menu items.
2. Turn the knob, and select <Input>, push the knob to confirm.
3. Turn the knob, select <Sizing Adjust>, push the knob to confirm.
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Note
Note: PIP Setting is applied to Standard Mode.
Note
In PIP mode, user need to select the image that to
set in <Layer Select> option before setting.
7
Tel: 00865925771197
Email: sales@rgblink.com
Fax: 00865925788216
http://www.rgblink.cn
Advertisement
Table of Contents
