Table of Contents
Advertisement
3. Push the [MENU] button and enter to the menu items, turn the rotary knob and select <Logo>:
4. Push the rotary knob to confirm. Turn the rotary knob again, select <Capture Logo>, and set "Capture Logo"
as "Enable":
Capture logo will finished after a few seconds.
Using LOGO Button
Push the [LOGO] button, user can set the test pattern, the settings are as follows:
Type: Select the type of the Test Pattern to be displayed. Options are:
LOGO: Video frame captured as in the LOGO.
RAMPS: H RAMP, V RAMP.
COLOR BARS: 100% COL BAR, 75% COL BAR, SMPTE COL BAR.
GRIDS: 16*16 GRID, 32*32 GRID, BURST.
GRAYS: 50% GRAY, GRAY STEP1, GRAY STEP2, WHITE, BLACK.
Raster Box: Enable or disable the raster box function. If raster box is "ON", the border is shown around the
image, which is for testing.
Diag Motion: Enable or disable Diagonal Motion of the selected test pattern.
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
->V Pos
Scaling Mode
Reset
Transition
System
->Logo
Display Setup
->Capture Logo
Logo Present
->Type
Raster Box
Diag Motion
AOI Raster Box
0
FULL
>>
>>
>>
>>
>>
Enable
Logo 1
H RAMP
OFF
OFF
>>
18
Tel: 00865925771197
Email: sales@rgblink.com
Fax: 00865925788216
http://www.rgblink.cn
Advertisement
Table of Contents
