Table of Contents
Advertisement
(6) After setting, turn the rotary knob, select <Quick Connection>, push the rotary knob to confirm for next
setting, shown as follows:
(7) Turn the rotary knob, select <Receiving Card>, push the rotary knob to confirm. Turn the rotary knob again,
and select <Choose Cable>, push the rotary knob to confirm. Turn the rotary knob, select Port U and push
the rotary knob to confirm.
(8) Set the horizontal card, vertical card, width and height. For example, set horizontal card as 3, vertical card as
2, width and height as 120, shown as follows:
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Card Type
Brightness
Output Format
->Quick Connection
->Sending Card
Receiving Card
Sending Card
->Receiving Card
->Choose Cable
Horizontal Card
Vertical Card
Width
Choose Cable
->Horizontal Card
Vertical Card
Width
Linsn
>>
>>
>>
>>
>>
>>
>>
Port U
1
1
64
Port U
3
2
120
12
Tel: 00865925771197
Email: sales@rgblink.com
Fax: 00865925788216
http://www.rgblink.cn
Advertisement
Table of Contents
