Table of Contents
Advertisement
(1) First, make sure the device is in normal operation.
(2) Select the input source, for example, DVI.
(3) Connect one cable to Port D, the other one to U.
(4) Connect Port U to LED screen, the settings are same as Step 4 to Step 8 of "Connect the Port D or Port U of
One Sending Card to LED Screen".
(5) Connect Port D to LED screen, the settings are as follows:
a. Turn the rotary knob, and select <Display Setup>:
b. Push the rotary knob to confirm, turn the rotary knob, select <Card Type> in <Quick Connection> option,
push the rotary knob to confirm, turn the rotary knob, select the sending card type, for example, select
Linsn (VSP 628PRO supports Linsn and Colorlight sender card, for Nova sender card, it only support
brightness and Gamma adjustment). Shown as follows:
c. After setting, turn the rotary knob, select <Quick Connection>, push the rotary knob to confirm for next
setting, shown as follows:
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Transition
System
Logo
->Display Setup
->Quick Connection
Senior
*Card Type
Brightness
Output Format
Quick Connection
Card Type
Brightness
Output Format
->Quick Connection
>>
>>
>>
>>
>>
>>
Linsn
>>
>>
>>
Linsn
>>
>>
>>
14
Tel: 00865925771197
Email: sales@rgblink.com
Fax: 00865925788216
http://www.rgblink.cn
Advertisement
Table of Contents
