Table of Contents
Advertisement
1. Enter digits of desired resolution by pushing the red number buttons. For example, input 1536 as following:
2. After the digital, push the rotary knob will add ×, means before × is the horizontal size. Same operation for
vertical size, For example, input 1536 as following:
3. After the digital, push the rotary knob will add ×, means before the × is the vertical size, and after the × is the
refresh rate. Only digital 50 or digital 60 supports for the refresh rate. For example, input 60 as following. Use
the digital buttons to finish the settings.
4. After input all the values, push the rotary knob to enable VSP 628PRO to output this resolution. VSP 628PRO
will take 5~10 seconds to enable this output resolution.
Capture LOGO
1. Push the signal button, and select the input signal.
2. Push the [SCALE] button, turn the rotary knob or numeric keys to set the size and position of the LOGO.
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Custom Formats
->1920×1080×60.0
Use red number keys and knob
for enter
Custom Formats
*1536×
Use red number keys and knob
for enter
Custom Formats
*1536×1536×
Use red number keys and knob
for enter
Custom Formats
->1536×1536×60.0
Use red number keys and knob
for enter
->H Size
V Size
H/V Size
H Pos
1857
1080
1857
0
17
Tel: 00865925771197
Email: sales@rgblink.com
Fax: 00865925788216
http://www.rgblink.cn
Advertisement
Table of Contents
