Operating Instruction; System Operation Mode; System Modes; Set The System Operation Mode - RGBlink VSP 628PRO Quick Start Manual

Operating Instruction

System Operation Mode

VSP 628PRO has five operation modes, which are called SYSTEM MODEs, these include Standard, Dual 2K,
Switcher, Split and MinDelay.

System Modes

Standard
In standard mode, both output channels output the same signal and resolution.
PIP is available for use.
This is the default mode following a reset.
Dual 2K
Each of the two output channels can have individually have resolution and scale set.
There is no PIP in this mode.
Switcher
Using this mode enables Preview and Program operations, with the DVI (as standard) being the Program output
and HDMI being the Preview output.
Resolution of each output is the same, however, each program/preview can have scale independently set.
There is no PIP in this mode.
Split
Allows splitting a input signal across both output channels, and also provides setting where the source is to be
split across more than one device.
There is no PIP in this mode.
MinDelay
Is mainly for broadcast applications, for signal conversion with less than 1 frame delay.
There is no PIP in this mode.

Set the System Operation Mode

Go to the SYSTEM menu select the required SYSTEM MODE.
6
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197 Fax: 00865925788216
Email: sales@rgblink.com http://www.rgblink.cn