Table of Contents
Advertisement
After setting, turn the rotary knob and select <Connect Type> according to actual connection mode. VSP
628PRO support 8 kinds of connection modes, they are
respectively.
Save to receiver after choose the connection mode, observe the display screen and make sure if display
image is correct. If wrong, change the connection types. Then connect the Port D or Port U of One Sending
Card to LED Screen is finished.
(9) The setting for port D is same as the above setting.
Rendering is as follows:
2. Connect the Port D and Port U of One Sending Card to LED Screen
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
->Height
Port Offset X
Port Offset Y
Connect Type
Height
Port Offset X
Port Offset Y
->Connect Type
120
0
0
>>
,
,
120
0
0
>>
13
Tel: 00865925771197
Email: sales@rgblink.com
,
,
,
,
Fax: 00865925788216
http://www.rgblink.cn
and
Advertisement
Table of Contents
