ADDITIONAL PROGRAMMING
Users can manually enter their user code into the keypad which then verifies the user
code and its authority with the panel. The 7073-WINT activates the on-board Form C relay
releasing a door strike or magnetic lock. To provide added flexibility, the keypad allows
connection of an external Wiegand output compatible reader.
Proximity Credential Compatibility
DMP keypads with internal proximity readers are compatible with most standard 125 Khz
proximity credentials. An external 13.56 MHz proximity reader can be connected and will
be compatible with 13.56 MHz proximity credentials. For a list of publicly supported card
formats, see Public Card Formats.
Note: Some proximity credentials are not compatible with DMP proximity keypads.
Test the intended proximity credentials with the application before installation. DMP
does not guarantee compatability with credentials not purchased from DMP.
Program a Credential
Access the User Menu by pressing CMD until MENU? NO YES displays. Choose
1.
YES, and present your proximity credential to the reader or manually enter your
user code at the keypad.
2.
Press CMD until USER CODES? displays.
Press any select key. Choose ADD.
3.
4.
At ENTER CODE: -, present the credential to the reader. The keypad works by
reading the user code from the data string sent by the access control reader.
7000INT Series Installation and Programming Guide | Digital Monitoring Products, Inc.
24
Need help?
Do you have a question about the 7000INT Series and is the answer not in the manual?