System Setup - Danfoss AK-CC 750A User Manual

Configuration - continued

System setup

1. Go to Configuration menu
2. Select System setup
3. Set system settings
50
General
All system settings can be changed by pressing
in the blue field with the setting and then indi-
cating the value of the required setting.
RS8HP102 © Danfoss 2018-09
3-
Controller name
In the first field you enter a name for what the
controller will be controlling.
Main frequency
Set frequency.
Alarm language
Select the language that alarm text should be
displayed in here.
Alarm text can be in a different language to
the operating language.
Clock
When the time is set the PC's time can be
transferred to the controller.
When the controller is connected to a net-
work, date and time will automatically be set
by the system unit in the network. This also
applies to change-over Daylight saving.
Power failure, the clock will be kept running
for at least 12 hours.
AK-CC 750A