hilscher NIOT-E-TPI51-EN-RE User Manual page 45

Control Panel
Edge Gateway | NIOT-E-TPI51-EN-RE (Connect)
DOC170502UM07EN | Revision 7 | English | 2019-07 | Released | Public
Setting port address for HTTP
Ø Enter the port address for the communication of the Edge Gateway
Manager over HTTP in input field HTTP Port.
Ø Store the port address as described subsequently. If a red error
message box with the text http port is not free appears, the port is
already used. In this case select another port.
Setting port address for HTTPS
Ø Enter the port address for the communication of the Edge Gateway
Manager over HTTPS in input field HTTPS Port.
Ø Store the port address as described subsequently. If a red error
message box with the text https port is not free appears, the port is
already used. In this case select another port.
Save changes of port adresses
Ø Click at Save changes in order to permanently store the port address.
Note:
Take care of this change not to have an immediate effect, but being
effective after the next restart of the Edge Gateway.
Refresh
Clicking at the button Refresh, the currently configured values for the port
addresses in the input fields HTTP Port and HTTPS Port are displayed.
45/294
© Hilscher 2017 – 2019