hilscher NIOT-E-TPI51-EN-RE User Manual page 185

Configuring PROFINET and defining signals
7. Saving the configuration and signal definition:
Edge Gateway | NIOT-E-TPI51-EN-RE (Connect)
DOC170502UM07EN | Revision 7 | English | 2019-07 | Released | Public
Ø To save the configuration and signal definition in the Edge Gateway,
click Project > Save.
ð The configuration and signal definition in the Edge Gateway is saved,
but not active yet.
Ø Click Update in the fieldbus node so that the fieldbus node reads the
signal definition again.
Ø To activate the configuration, click Reconfigure in the fieldbus node as
soon as you have finished or changed the configuration.
The name in the column Tag is a part of the signal name and is described
as Signal_tag or Bitlist_signal_tag in section Structure of the signal
names [} page 181].
185/294
© Hilscher 2017 – 2019