hilscher NIOT-E-TPI51-EN-RE User Manual page 141

Examples for Node-RED
3. Showing the sidebar:
4. Editing the MQTT output node:
5. Adding a broker:
Edge Gateway | NIOT-E-TPI51-EN-RE (Connect)
DOC170502UM07EN | Revision 7 | English | 2019-07 | Released | Public
Ø Show the sidebar using the keyboard shortcut Ctrl+spacebar or via
the Node-RED menu View > Show Sidebar.
Ø Click the tab Info.
Ø Click the MQTT output node to display its properties and a functional
description in the tab Info.
Ø To open the edit dialog, double-click on the MQTT output node.
Ê The edit dialog for entering the parameters will be displayed.
Ø If you use an MQTT node for the first time, the Server list contains the
entry Add new mqtt-broker only. In that case, click Edit
MQTT broker. As an alternative you can select a server from the list
and continue with step 6.
Ê The dialog box Add new mqtt-broker config node will be displayed.
Ø Enter the name localhost in the field Server of the tab Connection. By
means of localhost you address the MQTT broker integrated in the
Edge Gateway.
Ø For this (simple) example you can adopt the preset parameters without
having to enter any further parameters.
Ø Click Add.
Ê The MQTT broker is configured.
Ê The dialog box returns to the first edit dialog.
141/294
, to add an
© Hilscher 2017 – 2019