hilscher NIOT-E-TPI51-EN-RE User Manual page 148

Examples for Node-RED
10. Defining signals for module 2:
11. Saving the configuration:
12. Returning to Node-RED:
13. Entering names:
Edge Gateway | NIOT-E-TPI51-EN-RE (Connect)
DOC170502UM07EN | Revision 7 | English | 2019-07 | Released | Public
Ø Select 002: 16 receive byte (outputs) in the configuration tree.
Ê The signal configuration page with information on module 002 will be
displayed.
Ø Mark the available signal in the signal list.
Ø Click Delete selected items.
Ø Click Add new signals.
Ê The Add new signals dialog box will be displayed.
Ø Select the data type Signed16.
Ø Select the quantity: 8.
Ø Under tag name base enter Set_temperature.
Ø Click Ok.
Ê Column Tag displays Set_temperature_1 to Set_temperature_8. If
required, you can adapt the signal names in the column Tag.
Ø To save the configuration in the Edge Gateway, click Project > Save in
the main menu of the PROFINET-configuration.
Ê A message confirms that the configuration has been saved
successfully.
Ø Click Ok.
Ê The PROFINET configuration and signal definition are saved in the
Edge Gateway, but they are not activated yet.
Ø Return to the tab Node-RED in your browser.
Ø To adopt a new/changed PROFINET configuration, click Reconfigure
interface.
Ø To add a new fieldbus interface, click Add.
- or -
Update is offered as an alternative. Click Update, if only signal names
have been extended or changed, whereas the PROFINET configuration
has remained unchanged.
Ê The display returns to the edit dialog.
Ø Under Name enter a node name e.g. MyInput.
148/294
© Hilscher 2017 – 2019