hilscher NIOT-E-TPI51-EN-RE User Manual page 142

Examples for Node-RED
6. Configuring the MQTT output node:
7. Connecting the nodes:
Edge Gateway | NIOT-E-TPI51-EN-RE (Connect)
DOC170502UM07EN | Revision 7 | English | 2019-07 | Released | Public
Ê Under Server the edit dialog shows the address and the port
localhost:1883.
Ø Enter the name of the topic that you want to send (publish) in the field
Topic, e.g. Timestamp1.
Ø For QoS enter the value 1.
Ø Enter the name of this node, e.g. MyPublishingNode, in the field
Name.
Ê All parameters are entered.
Ø Click Done.
Ê The configuration of the MQTT output node is completed and the red
triangle has disappeared.
Ø To connect the Inject node with the MQTT node, hold down the left
mouse button and draw a connecting line (wire) from the output port of
the Inject node to the input port of the MQTT node.
ð
142/294
© Hilscher 2017 – 2019