hilscher NIOT-E-TPI51-EN-RE User Manual page 156

Examples for Node-RED
10. Opening the fieldbus configurator (PROFINET configurator):
11. Configuring PROFINET:
12. Defining signal names for modules:
Edge Gateway | NIOT-E-TPI51-EN-RE (Connect)
DOC170502UM07EN | Revision 7 | English | 2019-07 | Released | Public
Ø If Fieldbus interface does not yet display the entry PROFINET IO
Device, repeat step 5.
Ø If Fieldbus interface displays the entry PROFINET IO Device, click
Open Fieldbus Configurator.
Ê A new tab with the PROFINET configuration interface will be displayed.
Ø Click IO and Signal configuration in the configuration tree.
Ê The page IO Configuration with the list of Available IO items will be
displayed.
Ø At first, double-click the entry 16 send byte (inputs).
Ø Then, double-click the entry 16 receive byte (outputs).
Ê The list of IO items displays 2 PROFINET modules.
Ø In the column Tag of the list IO items, click send_001 (index 001
named 16 send byte (inputs)).
Ø Overwrite the available Tagname with the following new Tagname:
toController.
Ø In the column Tag of the list IO items, click receive_001 (index 002
named 16 receive byte (outputs)).
Ø Overwrite the available Tagname with the following new Tagname:
fromController.
Ê The new Tagname which is part of the entire signal name is now
displayed for each module.
156/294
© Hilscher 2017 – 2019