Page 1 User manual netIOT Edge Gateway NIOT-E-TIJCX-GB-RE (On-Premise) V1.2.0.0 Hilscher Gesellschaft für Systemautomation mbH www.hilscher.com DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 2: Table Of Contents
Control Panel.......................... 35 Opening the control panel .................... 35 8.1.1 First login ...................... 36 8.1.2 Secure connection .................. 37 Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 3 10.2 Example 2: MQTT input node .................. 130 10.3 Example 3: MQTT output node .................. 134 10.4 Example 4: Fieldbus input node................... 138 Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 4 The configuration of IP address area............ 204 14.3.2 Selecting the protocols to scan for field devices ........... 207 Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 5 18 Technical data ........................ 274 18.1 Technical data NIOT-E-TIJCX-GB-RE................. 274 18.2 Technical data PROFINET IO Device................ 276 18.3 Technical data EtherNet/IP Adapter................ 277 Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 6 19.3 Disposal of waste electronic equipment............... 279 20 Appendix.......................... 280 20.1 Legal notes........................ 280 List of figures ........................ 284 List of tables......................... 289 Contacts.......................... 292 Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 7: Introduction
Section Configuring the fieldbus and defining the signals [} page 156]updated. Chapter Isolated application execution with Docker [} page 208] updated. Table 1: List of revisions Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 8: Brief Description
OPC UA and MQTT functions address objects in IoT-capable field devices or in the cloud via standardized IoT protocols. The Hilscher netIOT Service offers additional software packets to extend the Edge Gateway base functions by further applications or accesses to specific clouds.
Page 9 To accomplish this, Docker uses special techniques from virtualization of operating systems. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 10: Device Drawings
10/292 3 Device drawings Positions of the interfaces Figure 2: Positions of the interfaces of NIOT-E-TIJCX-GB-RE front and top view Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 11: Table 2: Positions Of The Interfaces Of Niot-E-Tijcx-Gb-Re
[} page 17] (21) SD card holder (under removable cover, without function) Table 2: Positions of the interfaces of NIOT-E-TIJCX-GB-RE Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 12: Dimensions
Device drawings 12/292 Dimensions Figure 3: Dimensions Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 13: Connectors And Mounting
I/O shield of the fieldbus interface of the Edge Gateway. Figure 5: LED sticker Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 14: Power Supply
You need the USB connector if you connect a keyboard in order to change settings in the BIOS or if you do a firmware recovery with a USB stick. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 15: Serial Interfaces Com1 And Com2
ISO_GND Ground (reference potential) Data Set Ready Request to Send Clear to Send Ring Indicator Table 5: RS-232 D-Sub Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 16: Table 6: Rs-422 D-Sub
Send/receive signal negative Rx/Tx+ Send/receive signal positive n.c. n.c. ISO_GND Ground (reference potential) n.c. n.c. n.c. n.c. Table 7: RS-485 D-Sub Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 17: Wi-Fi
Connectors and mounting 17/292 Wi-Fi The Edge Gateway NIOT-E-TIJCX-GB-RE\WF (article number 1321.301) is equipped with a Wi-Fi interface. It supports 2 Wi-Fi operating modes: Access Point and Client. Operating mode Access Point allows the Edge Gateway to connect to other Wi-Fi devices in order to configure the Edge Gateway from a mobile device for example.
Page 18: Figure 6: Removing Cover Of Card Holder Slot
Figure 7: Releasing SIM card holder tray Ø Pull the SIM card tray out of the slot: Figure 8: Pulling out SIM card holder tray Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 19: Figure 9: Sim Card In Tray
SMA sockets of the gateway. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 20: Monitor Connectors
Use only 1:1 DVI or DP connectors. Adapters like DVI-I to VGA or DP to VGA are not supported by the gateway. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 21: Leds
LEDs 21/292 5 LEDs Positions of the LEDs on the gateway Figure 12: Positions of the LEDs on NIOT-E-TIJCX-GB-RE Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 22: Gateway Status Leds
GPIO 2: can be programmed, currently not used. yellow GPIO 3: can be programmed, currently not used. Table 8: Description of gateway status LEDs Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 23: Leds Of The Lan Interface
The device sends/receives frames. (yellow) (load dependent) The device does not send/receive Ethernet frames. (off) Table 9: LEDs LAN interface Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 24: Leds Of The Profinet Io Device Interface
"on" for approximately 50 ms, followed by "off" for 50 ms. The indicator turns on and off in irregular intervals to indicate low Ethernet activity. Table 11: LED state definitions for the PROFINET IO-Device protocol Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 25: Leds Of The Ethernet/Ip Adapter Interface
(yellow) dependent) The device does not send/receive Ethernet frames. (off) Table 12: LED states for the EtherNet/IP Adapter protocol Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 26: Table 13: Led State Definitions For The Ethernet/Ip Adapter Protocol
50 ms. The indicator turns on and off in irregular intervals to indicate low Ethernet activity Table 13: LED state definitions for the EtherNet/IP Adapter protocol Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 27: Commissioning The Edge Gateway
Read section Using the web browser to establish a connection with the Edge Gateway [} page 29] to find out how to access the Edge Gateway. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 28 ð Now you can access the Edge Gateway from your PC or notebook. Read section Using the IP address [} page 31] to find out how to access the Edge Gateway. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 29: Using The Web Browser To Establish A Connection With The Edge Gateway
The device is delivered (factory setting) with a label printed at its bottom. In the figure below the host name has a red frame. Figure 14: Device label: Hostname Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 30: Access To The Edge Gateway In The Windows Network Environment
You can now use the Edge Gateway manager to configure the device. For this purpose, read section Edge Gateway Manager web page [} page 33]. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 31: Using The Ip Address
You can now use the Edge Gateway manager to configure the device. For this purpose, read section Edge Gateway Manager web page [} page 33]. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 32: Edge Gateway Manager
Figure 15: Edge Gateway Manager Note: Remember that the secured HTTPS protocol is used here, not the widely spread HTTP protocol. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 33: Edge Gateway Manager Web Page
Opens the Edge Gateway documentation stored in the device. Opens the homepage of the Device Information Portal in the Internet. Requires a connection to the Internet. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 34: Table 14: Starting Applications With The Edge Gateway Manager
Function Opens the homepage of the netIOT platform in the Internet. Requires a connection to the Internet. Opens the Hilscher homepage in the Internet. Requires a connection to the Internet. Table 14: Starting applications with the Edge Gateway Manager Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) ©...
Page 35: Control Panel
Ø Enter your user name and your password. Ø Click at Login. ð The Control Panel will be displayed. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 36: First Login
Ø Enter the new administrator password. It must have at least 7 characters. For reasons of safety, Hilscher recommends using significantly more characters. A strong password consists of upper and lower case letters, digits and special characters. A quality indicator in the dialog box evaluates the password.
Page 37: Secure Connection
As standard, Edge Gateways contain a certificate issued by Hilscher that is not on the list of the known authorized issuers of certificates. Due to that, the browser signals an insecure connection and requests the confirmation to continue.
Page 38: Figure 17: Security Error Message Of The Internet Explorer
Ø To define an exceptional rule that enables the display of the user interface without repeated error messages, click Add Exception. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 39: Figure 20: Firefox Dialog Box: Adding Exceptional Safety Rule
Ø To save the rule, click Confirm Security Exception. ð When you open the control panel in future, security messages will no longer be displayed. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 40: Figure 21: Security Error Message Of Google Chrome (1)
Figure 22: Security error message of Google Chrome (2) Ø In order to continue, click at Proceed to ... (unsafe). ð The Control Panel is displayed. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 41: Overview And Main Menu
Displaying the permissions of the user. User profile [} page 95] Session > Logout Logout Logout [} page 96] Table 15: Functional overview of the Control Panel Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 42 If there is read but no write access right present, this has the following implications: The error message Permission denied is displayed when trying to · make a change. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 43: System Information And System Time
System info Description Hardware ident. Serial number of the Edge Gateway Model name Model designation of the Edge Gateway (NIOT-E-TIJCX-GB-RE) Firmware version Complete version designation of the firmware stored in the Edge Gateway System time Synchronization status of the internal clock of the Edge Gateway.
Page 44: License Manager
Edge Gateways is available. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 45: Figure 26: License Information In Window Details
Ø Hilscher creates an individual license file for your Edge Gateway according to the information supplied by you. Ø Hilscher sends this file back to you as an attachment within the answer e-mail. Consequently, this license file has to be transferred into the Edge Gateway as described in section How to transfer a license into the device? [} page 46].
Page 46: Figure 27: Message After The Transfer Of The License File Into The Edge Gateway
46/292 8.3.2.3 How to transfer a license into the device? Load the individual license file received from Hilscher from your PC into the Edge Gateway. Do the upload as follows: Ø Open the Control Panel in a web browser. Ø Select System > License Manager.
Page 47: Displaying The System Log Files
So ,for system supervision and safeguarding correct reaction on error situations, the file logging daemon syslogd (or an improved successor of it) runs on every Linux system,. On the Edge Gateways from Hilscher, the widely-spread logging daemon Syslog-ng is used, which had been developped by BalaBit IT Security Ltd.
Page 48: Table 19: Numeric Coding Of Facility Value In Priority Pri
Log alert Clock daemon 16…23 Locally used facilities (local0-local7) Table 19: Numeric coding of facility value in priority PRI Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 49: Table 20: Numeric Coding Of Severity Value In Priority (Pri)
UTF-8 (if a BOM character has been detected) or otherwise it is ASCII-coded. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 50: Table 21: Assignment Of Parts Of Message Line
The Edge Gateway is configured for a daily change of the logging file and to keep the files of the last seven days. This procedure is denominated as log rotation. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 51: Setting The System Time
Gateway afterwards so that all software components in the Edge Gateway take the changed time: System > Reboot. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 52 Synchronized to time server <IP address of the time server>:<Port number of the time server > (<NTP address of the time server>) Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 53: Configure Ports For Http/Https Communication
HTTP and HTTPS requests only at the above mentioned standard ports. Figure 30: Port settings Protocol Default port HTTP HTTPS Table 23: Default ports Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 54 Clicking at the button Refresh, the currently configured values for the port addresses in the input fields HTTP Port and HTTPS Port are displayed. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 55: Backup And Restore
Ø Select System > Backup and Restore in the control panel. Ê The following screen is displayed: Figure 31: Backup and recovery Ø Click at Create local backup. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 56: Figure 32: Warning Message
This means, the backup of system files has been completed. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 57: Figure 34: Backup And Recovery
Ø Select System>Backup and Restore within the Control Panel.. Ê The following screen appears: Figure 34: Backup and recovery Ø Click at Restore from backup. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 58: Figure 35: Recovery Dialog
In any way, do not interrupt the power supply of the Edge Gateway during system recovery! Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 59: Figure 37: Backup And Recovery
Ø Select System>Backup and Restore within the Control Panel. Ê The following screen appears: Figure 37: Backup and recovery Ø Click at Restore from backup. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 60: Figure 38: Recovery Dialog (External Source)
In any way, do not interrupt the power supply of the Edge Gateway during system recovery! Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 61: Figure 40: Backup And Restore When Backup File Is Present
ð The local backup is internally deleted. Right of Local backup the text No backup is displayed now instead the name of the former backup. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 62: Rebooting The System
Take care of the consequences of shutting down and restarting for your network, if you reboot the Edge Gateway. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 63: System Shutdown
· updates already installed signed packages. Note: You can install packages signed by Hilscher only! Use the package management only when Hilscher requests you to use the package management. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 64: Network
The default IP address of the LAN connection eth1 (Port 2) is 192.168.253.1 with the subnet mask 255.255.255.0. Figure 45: Default LAN-configuration Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 65: Table 24: Table Lan: Description Of The Columns And Elements
Subnet mask Table 24: Table LAN: Description of the columns and elements To save your changes permanently, click Save changes. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 66: Figure 46: Lan Configuration(Cifx0 Activated)
1 minute. To display cifx0, click Refresh. ð The Ethernet interface cifx0 is activated and can be configured now. Figure 46: LAN configuration(cifX0 activated) Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 67: Configuring Wireless Communication (Wi-Fi)
Wi-Fi interface (wlan0). MAC address displays the MAC address, if Wi-Fi is activated. Table 26: Wi-Fi Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 68: Figure 49: Wi-Fi Operating Mode: Access Point
ð The message Wi-Fi Settings are succcessfully changed is displayed. Operating mode Access point Figure 49: Wi-Fi operating mode: Access point Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 69: Table 27: Parameters Of The Operating Mode Access Point
DHCP server if you have checked the box DHCP server. Table 27: Parameters of the operating mode Access point Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 70: Figure 50: Wi-Fi Operating Mode: Client
Control Panel 70/292 Operating mode: Client Figure 50: Wi-Fi operating mode: Client Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 71: Table 28: Parameters Of The Operating Mode Client
ð If a WLAN client is found, its data will be displayed in a line of the table Client. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 72 Ø Click Save changes. ð A security request box appears: Ø Click at OK. ð The Wi-Fi settings are saved. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 73: Field
Edge Gateway does not need a signal configuration in this mode. Table 30: Operating modes in the passive operating mode Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 74: Configuring Cellular Communication
2G/3G/4G standard. Cellular communication is possible only with the NIOT-E-TIJCX-GB-RE\4EU gateway variant (article number 1321.302). If you are using a different gateway variant, a Cellular interface not installed message will be displayed on opening this page.
Page 75: Figure 52: Connection Configuration Parameter
Ø Restart the gateway by choosing System > Reboot from the menu, so that the modem can start connecting with the provider. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 76: Figure 53: Network Information
Location Area Code Location area code (LAC) IMEI Identification number of the gateway's cellular modem Table 33: Network information Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 77: Table 34: Ip Settings
IP address of the Dynamic Name Server of the data connection DNS server 2 IP address of the Dynamic Name Server of the data connection Table 34: IP settings Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 78: Configuring Ip Routes
IP destination addresses outside the Edge Gateway (e.g. on the Internet). Figure 55: Routes Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 79: Table 35: Parameters Of Current Connection Configuration Table
Indicates whether a DHCP service has been set for the connection. Table 35: Parameters of Current connection configuration table Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 80: Figure 56: Defined Routes
Ø Click Add button. Ê The table creates a new route with the default destination address 0.0.0.0/0: Figure 57: Create new route Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 81: Figure 58: Define New Route
Metric field. The lower the number, the higher the priority. Ø Click Save button. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 82: Configuring Firewall
On this page, you can set individual firewall parameters for each connection/interface of the Edge Gateway separately. Figure 59: Firewall Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 83: Table 37: Parameters Firewall
"Firmware Recovery" (see section Firmware recovery [} page 265]). Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 84: Hostname
The hostname is saved by clicking at If storing the hostname has succeeded, the following message box is displayed: Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 85: Services
· expiration date, if the license has a run-time limit. Table 39: Operating and display elements A service can allow you individual settings. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 86: Figure 62: Opc-Ua Server For Edge Settings Within The Control Panel, Page Network>Field
8.6.1.2 OPC UA Server for Edge Figure 62: OPC-UA Server for Edge settings within the Control Panel, page Network>Field Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 87: Table 40: Parameters Of The Opc Ua Server For Edge
Anonymous access Anonymous access to the OPC UA Server (not secure) Checked / not checked Passive mode of operation Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 88 Edge Gateway. Ø Click at Stop. Ø Wait for some seconds. Ø Click at Start. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 89: User Management
Access via REST-API (see Functions of the Edge Server [} page 199]) is also a resource. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 90: Table 41: Access Rights Onto Resources
No access None Read access only Read Read and write access Read, Write Table 42: Access rights to resources Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 91: Managing User Accounts
Figure 64: User account page Each user account has a user name, a password, and an assigned role. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 92: Security
1. Selection list for the certificate type (1): Trusted Certification Authorities or Service certificates 2. File selection area for certificate and key files 3. Certificate Viewer Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 93: Figure 66: Certificate Type Selection List
On selection of Root Certificates the list structure of the Trusted CA Store in the Edge Gateway is displayed. On selection of Service Certificates a tree structure is displayed. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 94: Figure 67: Certificate Viewer
For more information on the foundations of asymmetric encryption techniques and public key infrastructure, see sections Asymmetric encryption [} page 237] and Certificates and keys [} page 239]. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 95: Help
· change your E-mail address, and · change your password. · Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 96: Logout
Prior to accessing the Edge Gateway again, a new login (Specifying user name and password) is necessary. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 97: Node-Red - The Wiring Editor
The current documentation is available here: http:// nodered.org/docs/. For beginning, read the document Getting Started: http://nodered.org/docs/getting-started/. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 98: Modelling Iot Flows With Nodes
.payload contains the payload to be transported. · Node-RED has an ample library with already predefined nodes which are ready for immediate use. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 99: Opening Node-Red
Ø In the Edge Gateway manager click on the tile Node-RED. Ê The Node-RED start screen will be displayed. Ø Enter your user name and password. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 100: Figure 73: Node-Red Workspace
Connection without certificate with Microsoft Internet Explorer [} page 38] Connection without certificate with Firefox [} page 38] Connection without certificate with Google Chrome [} page 40] Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 101: Graphical User Interface
Expand or collapse the node library (13) Node library (14) Node category (15) Nodes (16) Node filter Table 43: Node-RED user interface Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 102: Figure 75: Node
The blue circle shows that this node has been changed but not transmitted yet. Output port (if available) Node status (if available) Input port (if available) Table 44: Node elements Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 103: Working With Node-Red
Ø Use the mouse to drag a node from the library and insert the node in the flow. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 104 Ø Click on Deploy. ð The flow will be deployed from the workspace to the Edge Gateway and activated. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 105: Using Git Hub Repository To Store Flows (Projects)
Note: For a description of the projects function, see https://nodered.org/ docs/user-guide/projects/. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 106: Menu Deploy
Ê The menu Deploy opens. Ø Click on the menu command to be executed. Ê The dialog box Confirm Deploy is displayed. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 107 Ø Click on Confirm deploy to deploy the flow to the Edge Gateway and activate it. ð Thus, the flow is activated in the Edge Gateway. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 108: Dashboard
The register card Dashboard of the Edge Bar is itself divided into three register cards: Layout · Theme · Site · Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 109: Table 47: Areas Of The Dashboard Configuration
Color selection field „Page Settings“ Theme - is only displayed, if option „Custom“ has been chosen in selection list "Style" Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 110 ð The background color is changed. However, the change will get effective at the next deploy operation. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 111: Figure 77: Dialog "Edit Dashboard Tab Node
Ø In filed Nav.Menu, you can set whether the tab is visible in the navigation menu (option Visible) or not (option Hidden). Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 112: Figure 78: Dialog "Edit Dashboard Tab Node
ð The dialog Edit dashboard tab node is closed and the tab is removed from the tree structure. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 113: Figure 79: Dialog "Edit Dashboard Tab Node
Ø You can control via the checkbox Display Group Name whether the name of the group as displayed in the field Name is displayed on the dashboard, or not. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 114: Figure 80: Dialog "Edit Dashboard Tab Node
ð The dialog Edit dashboard tab node is closed and the group is removed from the tab. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 115 Ø Select the desired settings for your widget. Ø Click at ð The edit dialog is closed and the settings of your widget are stored. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 116 Ø Click at ð The widget is deleted and removed from the group, to which it belonged previously. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 117: Figure 81: Dialog "Edit Link Node
Ø Specify the link address in the field Link (Protocol http or https). Ø Specify in field Icon, how the link should be opened (Options dashboard or open_in_browser) Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 118: Figure 82: Dialog "Edit Link Node
Edit link node. ð The dialog Edit link node is closed and the link is removed from the link list. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 119: List Of Nodes
Watson IoT serial Output debug link mqtt http response web socket fieldbus s7comm Watson IoT serial Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 120 Analysis sentiment Advanced watch feedparse exec Cloud azureiothub IIoT OPC UA nodes Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 121 Table 48: List of standard nodes Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 122: Mqtt Input Node
Here you enter the name of the MQTT input node that is displayed at the node in Node-RED and used for identification. Table 49: Parameter MQTT input node Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 123: Figure 85: Dialog Box Mqtt Broker Config Node - Tab Connection
By checking this box you can activate MQTT 3.1 support. MQTT 3.1 support Table 50: Parameters in the tab Connection Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 124: Figure 86: Dialog Box Mqtt Broker Config Node - Tab Security
Here you enter the user name for the connection. Password Input field Here you enter the password for the connection. Table 51: Parameters in the tab Security Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 125: Figure 87: Dialog Box Mqtt Broker Config Node - Tab Messages
2 = Exactly once (Sender and receiver acknowledge the message using additional acknowledge messages) Table 52: Parameters in the tab Messages Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 126: Mqtt Output Node
Parameters of the MQTT output node This section describes the parameters of the MQTT output node. Figure 89: Dialog box MQTT output node Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 127: Table 53: Parameters Of The Edit Mqtt Output Node
Message of the MQTT output and input node are identical and described in section MQTT input node [} page 122]. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 128: Examples For Node-Red
ð The inject node can send messages to the debug node. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 129 ð The sidebar should display numbers. In the standard default setting, the inject node uses the quantity of milliseconds that have elapsed since January 1st, 1970, as payload. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 130: Example 2: Mqtt Input Node
Ø To open the edit dialog, double-click on the MQTT input node. Ê The edit dialog for entering the parameters will be displayed. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 131 Ê The dialog box returns to the first edit dialog. Ê Under Server the edit dialog shows the address and the port localhost:1883. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 132 The section MQTT input node [} page 122] describes the parameters of the MQTT input node. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 133 ð The Debug node displays messages of the MQTT input node as soon as the topic Timestamp1 changes. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 134: Example 3: Mqtt Output Node
Ø Click the MQTT output node to display its properties and a functional description in the tab Info. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 135 Ê The dialog box returns to the first edit dialog. Ê Under Server the edit dialog shows the address and the port localhost:1883. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 136 (wire) from the output port of the Inject node to the input port of the MQTT node. ð Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 137 MQTT broker. If you use this example together with the example MQTT input node, you can display the value of the topic Timestamp1 in the tab Debug. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 138: Example 4: Fieldbus Input Node
Ø Click the tab Info. Ø Click thefieldbus input node to display its properties and a functional description in the tab Info. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 139 Add new fieldbus interface), click Edit to add a new fieldbus interface. Ê The fieldbus configuration node will be displayed. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 140 Ø Then, double-click the entry 16 receive byte (outputs) in the list of Available IO items. Ê The list of IO items displays 2 PROFINET modules. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 141 Ê Column Tag displays Temperature_1 to Temperature_8. If required, you can adapt the signal names in the column Tag. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 142 Ê The display returns to the edit dialog. 13. Entering names: Ø Under Name enter a node name e.g. MyInput. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 143 ð As soon as the value of the signal changes, the Debug output will display the changed value/s and status information. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 144: Figure 93: Message Of The Fieldbus Input Node (Without Error)
Set_temperature_2. The value 0 for "Error" indicates that the cyclic PROFINET communication works without problems. Figure 93: Message of the fieldbus input node (without error) Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 145: Figure 94: Message Of The Fieldbus Input Node (With Error)
The following figure displays a value for "Error" that is unequal to 0, i.e. the PROFINET communication does not work. Figure 94: Message of the fieldbus input node (with error) Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 146: Example 5: Fieldbus Output Node
1. Inserting the first Inject node: Ø Drag an Inject node from the node library and drop it in the worksheet. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 147 3. Inserting the second Inject node: Ø Drag another Inject node from the node library and drop it in the worksheet. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 148 Ê The red triangle the fieldbus node is displayed with indicates that the node still needs some more parameters which you have to configure in the following steps. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 149 Ø If it is not displayed, you first have to load the firmware for PROFINET IO Device in the control panel via the menu entry Network > Field (in the active mode). Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 150 Ê The new Tagname which is part of the entire signal name is now displayed for each module. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 151 Ê The PROFINET configuration and signal definition are saved in the Edge Gateway, but they are not activated yet. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 152 Ø Click Deploy to transmit the nodes, that have so far existed in the editor only, to the device and activate them. ð The flow is activated in the Edge Gateway. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 153 ð Signal Temperature_2 is set to value 2 and transferred to the PROFINET IO Controller. Ø At the PROFINET IO Controller, display the input data in a window. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 154: Configuring And Using The Fieldbus Node
4. Configuring the fieldbus output node Table 54: Standard procedure The following table shows the sequence of the configuration steps: Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 155: Table 55: Configuration Steps
Configure modules node Fieldbus node (configured) Project > Save Define signals Reconfigure / Update Deploy Table 55: Configuration steps Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 156: Configuring The Fieldbus And Defining The Signals
Ê The edit dialog Add new fieldbus interface config node will be displayed. 2. Opening the PROFINET configuration Ø Click the square to the right of fieldbus interface Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 157: Figure 97: Dialog Box "Add New Fieldbus Interface Config Node
Figure 98: Dialog box "Add new fieldbus interface config node" Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 158: Figure 99: Profinet Configuration
ð The user interface for the fieldbus configuration of the Edge Gateway will be opened in a new browser window: (the example shows the PROFINET configuration) Figure 99: PROFINET configuration Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 159: Figure 100: Available Io Items (Example In Figure: Profinet)
IO items in einer neuen Zeile angezeigt. Figure 101: IO items (Example: PROFINET) Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 160: Figure 102: Dialog „Add New Fieldbus Interface Config Node
ð The flow will thus be transmitted to the Edge Gateway, and the new configuration will be applied in the Edge Gateway. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 161: Changing The Existing Fieldbus Configuration
PROFINET. Figure 104: Fieldbus_node Ê The edit dialog Edit fieldbus in node will be displayed. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 162: Figure 105: Dialog Edit Fieldbus In Node
Figure 106: Dialog Edit fieldbus in node Ø Select the interface to be changed (in the example this is cifX0 PROFINET...). Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 163: Figure 107: Dialog "Edit Fieldbus Interface Config Node
Edge Gateway no longer processes the data received. Ø Click Open fieldbus configurator. Figure 108: Button Open fieldbus configurator Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 164: Figure 109: Start Screen Of The User Interface For Fieldbus Configuration Of The Netiot Edge Gateway (The Example In The Figure Shows Profinet)
Ê The steps to be made in the user interface for fieldbus configuration of the Edge Gateway are thus completed. Ø Return to the Node-RED browser window that was originally used. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 165: Figure 110: Edit Fieldbus Interface Config Node
In such a case, check your settings of the Fieldbus interface and the control panel (menu Network > Field)! Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 166: Configuring Profinet And Defining Signals
(see Help - Contents [} page 168]), and · display the software version of the configuration GUI (see Help - · Information [} page 168]). Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 167: Project - Save
Ø Select a printer or an output file and set the printing parameters. ð The current configuration and signal definition will be printed. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 168: Help - Contents
To display the version of the PROFINET configuration software of the netIOT Edge Gateway, proceed as follows: Ø Click Help > Info. ð The version will be displayed. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 169: Configuration Tree
PROFINET IO controller or a stand-alone tool. For this purpose the tools use the DCP protocol. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 170: Figure 114: List Of The Possible Input And Output Modules
Shows the start address of the module (offset in bytes) in the input- and output data memory. The offset is calculated automatically. Table 58: Contents of the table “IO items” Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 171: Table 59: Controls Of The Table "Io Items
Enter key. Table 59: Controls of the table “IO Items” Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 172: Figure 116: Selected Io Item (Module) For Which You Define Signals
Figure 117: List of the signal names of an IO item (module) Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 173: Table 61: Contents Of The Table „Signals
Enter key. Table 62: Controls of the table „Signals“ Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 174: Table 63: Data Types For Signal Names
5. You can enter the name for signal_tag or bitlist_signal_tag as described in section Defining signals (procedure) [} page 176]. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 175: Figure 118: List Of The Configured Input And Output Modules
PROFINET configuration. In the next step define the signal names as described in section Defining signals (procedure) [} page 176]. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 176 Ø Click Delete selected items. Ê The predefined signal is deleted and you can define your own signals. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 177 6. Defining signals: Ø Repeat steps 1‑5 until you have defined all required signals. ð The signal definition is prepared. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 178 The name in the column Tag is a part of the signal name and is described as Signal_tag or Bitlist_signal_tag in section Structure of the signal names [} page 174]. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 179: Figure 119: List Of The Send And Receive Signals
Table 64: Columns of the table of the send and receive signals You can print the table using Print > Print configuration. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 180: Help
Page with the contents of the online help (currently empty) Info This page displays the version of the PROFINET configuration software. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 181: Configuring Ethernet/Ip And Defining Signals
(see Help - Contents [} page 183]), and · display the software version of the configuration GUI (see Help - Information [} page 183]). Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 182: Project - Save
Ø Select a folder and then click Save. Ø Use the saved EDS file to configure the EtherNet/IP Scanner. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 183: Printing The Configuration
To display the version of the EtherNet/IP configuration software of the netIOT Edge Gateway, proceed as follows: Ø Click Help > Info. ð The version will be displayed. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 184: Figure 54: Ip Settings
Network mask of Edge Gateway · IP address of the gateway, to which the Edge Gateway is connected within the IP network Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 185: Io And Signal Configuration
Min_length and Max_length). The lower table (IO items) displays the EtherNet/IP configuration and is empty at the beginning. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 186: Figure 122: List Of The Possible Send And Receive Assemblies
Do not enter two or more underscores in succession. To open the signal configuration of the respective assembly, double-click any line. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 187: Figure 124: Selected Io Item (Assembly) For Which You Define Signals
Shows the start address of the assembly (offset in bytes) in the input- and output data memory. The offset is calculated automatically. Table 70: Contents of the table „IO items“ Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 188: Figure 125: List Of The Signal Names Of An Io Item (Assembly)
(a-z), · numbers (0-9), and the underscore. · Do not enter two or more underscores in succession. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 189: Table 72: Controls Of The Table „Signals
Real (Floating point ) 32 ≈ -/+ 10 real64 Long real ≈ -/+ 10 Table 73: Data types for signal names Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 190: Figure 126: List Of The Configured Send And Receive Assemblies
Item“ line has been marked, or before a marked „IO item“ line. Figure 126: List of the configured send and receive assemblies Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 191 If you want to access each single bit, define 16 signals of data type bit each. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 192 Tag of the table Signals. Ø If required, you can enter a signal description in the column Description of the table Signals. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 193 The name in the column Tag is a part of the signal name and is described as Signal_tag or Bitlist_signal_tag in section Structure of the signal names [} page 190]. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 194: Signal Definitions Overview
Table 74: Columns of the table of the send and receive signals You can print this table using Print > Print configuration. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 195: Download Of The Eds File
Info This page only displays the current version of the EtherNet/IP configuration software. See Help - Information [} page 183]. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 196: Edge Server
The Configuration of the Edge Server [} page 204] 14.1 Function principle The Edge Server is a software component that has been developed by Hilscher and is · executed under the Linux operating system of the Edge Gateway. enables secure and capsuled access from the IT-network to functions ·...
Page 197: Figure 128: Edge Server Structure
Figure 128: Edge Server structure Note: For more information on the protocol HTTPS, see https:// en.wikipedia.org/wiki/HTTPS, on REST APIs, see https:// en.wikipedia.org/wiki/Representational_State_Transfer. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 198: Communication With The Ot-Network
4. Granting read and right access rights requires administrator rights and is described in section Managing user roles [} page 89]. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 199: Functions Of The Edge Server
For a detailed description of the functions and parameters provided by the netIOT Edge Server API, see http://www.netiot.com/external/stkit-doku/. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 200: Internal Structure Of The Edge Server
The following figure shows the internal structure of the Edge Server for the Edge Gateways: Figure 130: Internal structure of the Edge Server Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 201: Edge Server Control Center
Information on the Edge Server · Configuration of the Edge Server · List of services · Scan protocols of field devices Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 202: Service List
For this service, an error message has been stored. Table 76: Symbols for the state of operation in the service list Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 203 Operating status (displayed as text) · Last information · Version · Description · · Information on the author Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 204: Configuration Of The Edge Server
Configuration. Ê The configuration screen page displays the settings for the server configuration. Figure 133: Server configuration Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 205: Figure 134: Configuration Of The Scan Settings
IP-address range, the entered IP-addresses must fall into the range of the cifX0 network and its IP-address. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 206: Figure 135: Correct Configuration Of The Scan Settings
ð Now, the screen page for the scan settings should look like that: Figure 135: Correct configuration of the scan settings Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 207: Selecting The Protocols To Scan For Field Devices
Ø To save your settings in the Edge Server, click ð Thus, your scan protocol settings of the field devices are saved. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 208: Isolated Application Execution With Docker
Docker services. Note: Further information concerning portainer.io can be found at http:// portainer.io. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 209 Note: For more information on containers, see the Docker documentation (https://docs.docker.com/get-started/#prerequisites) and, in particular, its glossary (https://docs.docker.com/glossary/? term=container). Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 210: Prerequisites For Working With Docker
Control Panel as described in Starting, stopping and configuring services [} page 85]. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 211: Working With Docker Via The Web Gui
Ê The status changes from Stopped to Running and the yellow icon at the Docker service within the services list changes to green, see figure. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 212: Figure 137: After The Start Of The Docker-Service Within The Control Panel
(Starting the portainer.io interface for working with the containers [} page 213]) as subsequently described. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 213: Starting The Portainer.io Interface For Working With The Containers
You are urged to specify the user name and twice the password for the first user with administrator rights. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 214: Figure 140: Portainer.io - Initial Screen Home (Endpoints)
Ø Click at entry "Dashboard" in the blue menu on the leftside . Ê The page „Dashboard“ of portainer.io is displayed. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 215: Figure 141: View Of Portainer.io Dashboard
Figure 142: Container list (portainer.io) Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 216: Functions For Working With Containers
Continuing the execution of a container after an interruption Remove Rermoving, i.e. deleting a container Table 77: Functions for working with containers Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 217: Example: Execute Web Server Nginx As A Container
NGINX Repository having been installed there. The http address of the NGINX Repository is https:// hub.docker.com/_/nginx/. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 218: User Management
The integrated user management of portainer.io may not be confused with the user management of the control panel. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 219: Figure 144: Portainer.io - Entry Page Home
Ø Within the darkblue menu on the left side click at Users in the SETTINGS area. Ê The page for the user management within portainer.io is displayed (Users>User Management). Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 220: Figure 145: Portainer.io - Page Users > User Management
The figure shows an example configuration with a user admin being defined with assigned administrator rights and with another user named default_user being defined without any administrator rights. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 221: Figure 146: Portainer.io - Display Of User Details
(Set slider right of Administrator to position „right“) Change password (Specify password twice in the input fields at New · password und bei Confirm password) Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 222: Registry Management
Ø Within the darkblue menu on the left side, click at Registries within the SETTINGS area. Ê The page Registries (Registry management) for the registry management in portainer.io is displayed. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 223: Figure 149: Portainer.io - Page Registries (Registry Management)
Figure 150: portainer.io - Page Registries (Registry-Management), Authentication has been activated Here you can enter the username within field Username and the password within field Password. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 224: Figure 151: Portainer.io - Page Create Registry (Registries > Add Registry)
ð In case of a URL conflict the message Failure – A registry with the same URL already exists is displayed. In that case choose another URL. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 225: Figure 152: Tile Docker Within The Edge Gateway Manager
Ø Within the darkblue menu on the left side, click at Registries within the SETTINGS area. Ê The page Registries (Registry management) for the registry management in portainer.io is displayed. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 226: Figure 154: Portainer.io - Page Registries (Registry Management)
Figure 155: portainer.io - Page Registries (Registry-Management), Authentication has been activated Here you can enter the username within field Username and the password within field Password. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 227: Figure 156: Portainer.io - Page Create Registry (Registries > Add Registry)
Ø Click at the large blue button Custom registry at the right side. Figure 157: Portainer.io - Page Create registry (Registries > Add registry), Custom registry selected Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 228 ð In case of a URL conflict the messageFailure – A registry with the same URL already exists is displayed. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 229: Figure 158: Portainer.io - Page Registries (Registry-Management)
Figure 158: portainer.io - Page Registries (Registry-Management) ð The page Registry access (Registries > [Registry name] > Access Management) is being opened: Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 230: Figure 159: Portainer.io - Registry Access
(Field Name) and the URL (Field URL) of the registry. In area Access management users and teams of users are accepted or rejected. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 231: Stack Management
Ø Within the darkblue menu on the left side click at Stacks. Ê The page Create Stacks (Stacks > Add Stack) for the stack management in portainer.io is displayed. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 232: Figure 162: Portainer.io - Page Create Stacks (Stacks > Add Stack)
See section Define access control [} page 233]. 4. Area Actions Here the deployment of the stack can be started. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 233 Select one or more teams right of Authorized teams. This implies, that users or teams have already been defined. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 234: Figure 163: Portainer.io - Creating A Stack Via Web Editor
It looks like this: Figure 163: Portainer.io - Creating a stack via web editor Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 235: Figure 164: Portainer.io - Area "Upload
Ø Click at Deploy the stack in area Actions in order to create the stack ð If the stack has been created successfully, an according message is displayed. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 236: Figure 165: Portainer.io - Creating A Stack Using Githib
Ø Click at Deploy the stack in area Actions in order to create the stack ð If the stack has been created successfully, an according message is displayed. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 237: Public Key Infrastructure
Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 238: Figure 166: Process Of Asymmetric Encryption
5. The server decrpyt the message using his private key. 6. Client and server continue its encrypted communication using one new created protected transmitted key (symmetric communication). Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 239: Certificates And Keys
Country or region State Location Table 80: Attributes concerning the issuer and owner of the certificate zum Zertifikats- Aussteller und Zertifikats-Inhaber Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 240: Hierarchy Of Trust
The display of root certificates in the Control Panel of the Edge Gateway follows this list. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 241: File Formats For Certificate And Key Files
-----END RSA PRIVATE KEY----- at the end. Ø DChange the file extension *.CER or *.CRT to *.PEM. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 242: Use Cases
List of included root certificates). Figure 167: Use case 1: Verification of the authenticity of the communication partner (Server) Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 243: Use Case 2: Server Certificates For Edge Gateway Services
Both files have the PEM file format, see section File formats for certificate and key files [} page 241]. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 244 For details about “How to work with the certificates and key files (Upload, Download, Removal, Creation)”, see section Working with server certificates for inbound connections [} page 250]. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 245: Use Case 3: Client Certificates For Specific Servers
Mark the entry node-opcuaclient_cert.pem and then click Copy path. Use the copied path in the OPC UA Client node for the path to the certificate. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 246 How to work with client certificates, describes section Working with client authentication certificates for outbound connections [} page 256]. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 247: Verification Of The Authenticity Of The Communication Partner Using Trustworthy Certificates
ð The window Certificate Viewer now shows the data of the selected certificate (Structure according to X.509 [} page 239]). Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 248: Upload A Trustworthy Certificate Into The Edge Gateway
Gateway, it is necessary to consequently perform a reboot of the Edge Gateway [} page 62] for the changes to become effective. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 249: Download Of Certificates From The Edge Gateway Into A File
Ø If you are really sure not to need the current certificate file any longer, click at Yes. ð The selected certificate file is being removed from the Edge Gateway. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 250: Working With Server Certificates For Inbound Connections
RED [} page 97], the Edge Server [} page 196] or the REST API [} page 198] from a file into the Edge Gateway. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 251 After a short delay, a message is displayed indicating that the upload has been completed and the Edge Gateway requires a restart Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 252 After a short delay , a message is displayed indicating that the upload has been completed and the Edge Gateway requires a restart Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 253: Working With Certificates For Https And Opc Ua Server
Ø Select Save and then click on OK. ð The file is stored in *.pem [} page 241] format. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 254 Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 255: Working With Key Files For Https And Opc Ua Server
Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 256: Working With Client Authentication Certificates For Outbound Connections
Edge gateway. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 257: Uploading A Pair Of Certificate And Corresponding Key File For Client Authentication
Edge Gateway consequently if you upload a certificate for client authentication from a file into the Edge Gateway. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 258 A message is displayed indicating that the upload has been completed and the Edge Gateway requires a restart. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 259 A message is displayed and informs you, that uploading has been completed and the Edge Gateway requires a restart. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 260: Working With Certificates For Client Authentication
Ø Select Save and then click on OK. ð The file is stored in *.pem [} page 241] format. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 261 Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 262 ð The path is now copied into the Windows clipboard. You can use it within Node-RED to open and configure the corresponding element within Node-RED. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 263: Working With Key Files For Client Authentication
Ø Select Save and then click on OK. ð The file is stored in *.pem [} page 241] format. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 264 ð The path to the key file is now copied into Windows clipboard. You can use it within Node-RED to open and configure the corresponding Node- RED element. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 265: Firmware Recovery
You have downloaded the latest firmware image for the NIOT-E-TIJCX- · GB-RE Edge Gateway from the www.netiot.com platform. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 266: Step-By-Step Instructions
Ø Open the Windows Explorer. Ø Select the USB stick and choose Format... from the context menu. Figure 169: Formatting USB stick Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 267: Figure 170: Format Usb Stick Dialog Window
Ê After formatting is finished, the USB stick is labelled in the Windows Explorer by its new name “RECOVERY”. Figure 171: Formatted USB stick Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 268: Figure 172: Prepared Usb Stick
268/292 2. Unpack firmware image from ZIP file and copy it onto the USB stick. Ø The firmware image is provided on the Hilscher netIOT platform as compressed ZIP archive file (ntijcx-gb_xx.x.xx.zip). Use a tool like 7-Zip to unpack the ZIP file and copy it onto the USB stick.
Page 269: Figure 173: Bios Start Screen
Ê After a few seconds, the gateway beeps and the BIOS start screen appears on the monitor: Figure 173: BIOS start screen Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 270: Figure 174: Bios Setup Menu
Ø In the main menu, use the right arrow key to navigate and open the Boot tab: Figure 175: Boot options tab in BIOS setup menu Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 271: Figure 176: Boot Option #1 In Bios Setup Menu
USB stick]: Figure 177: List for boot option #1 Ø Press Enter key to take over this option. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 272: Figure 178: Save & Exit Tab
Ê The gateway restarts and boots from the connected USB stick. The following boot option question appears: Figure 180: Boot options question Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 273: Figure 181: Firmware Update In Progress
Firmware recovery 273/292 Ø Ignore the question, respectively leave the option at USB: Hilscher IoT Platform recovery. Ê The gateway updates its firmware. This is indicated by a progress bar at the bottom of the monitor screen: Figure 181: Firmware update in progress Ê...
Page 274: Technical Data
Ambient temperature range for -20°C ... +80°C storage Humidity range 10 % … 93 % relative humidity (non-condensing) Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 275 Sinusoidal: 2 Grms @ 5~500 Hz, IEC 60068-2-64 * usable with netIOT service product only (NIOT-S-LIC-xxx) Table 83: Technical data NIOT-E-TIJCX-GB-RE Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 276: Technical Data Profinet Io Device
Reference to stack version V3.9 Table 84: Technical data PROFINET IO RT IRT Device Protocol Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 277: Technical Data Ethernet/Ip Adapter
CIP Sync Services are not implemented. TAGs are not supported. Reference to stack version V2.10 Table 85: Technical data EtherNet/IP Adapter protocol Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 278: Decommissioning, Dismounting And Disposal
Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 279: Disposal Of Waste Electronic Equipment
As a consumer, you are legally obliged to dispose of all waste electronic equipment according to national and local regulations. Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 280: Appendix
280/292 20 Appendix 20.1 Legal notes Copyright © Hilscher Gesellschaft für Systemautomation mbH All rights reserved. The images, photographs and texts in the accompanying materials (in the form of a user's manual, operator's manual, Statement of Work document and all other document types, support texts, documentation, etc.) are protected by German and international copyright and by international trade and protective provisions.
Page 281 Liability disclaimer The hardware and/or software was created and tested by Hilscher Gesellschaft für Systemautomation mbH with utmost care and is made available as is. No warranty can be assumed for the performance or...
Page 282 Additional guarantees Although the hardware and software was developed and tested in-depth with greatest care, Hilscher Gesellschaft für Systemautomation mbH shall not assume any guarantee for the suitability thereof for any purpose that was not confirmed in writing. No guarantee can be granted whereby the...
Page 283 The customer hereby expressly acknowledges that this document contains trade secrets, information protected by copyright and other patent and ownership privileges as well as any related rights of Hilscher Gesellschaft für Systemautomation mbH. The customer agrees to treat as confidential all of the information made available to customer by Hilscher Gesellschaft für...
Page 284: List Of Figures
List of figures 284/292 List of figures Figure 1: Edge Gateway communication structure.............. Figure 2: Positions of the interfaces of NIOT-E-TIJCX-GB-RE front and top view ....10 Figure 3: Dimensions......................12 Figure 4: Drilling template....................13 Figure 5: LED sticker ......................13 Figure 6: Removing cover of card holder slot ..............
Page 285 Dialog "Edit dashboard tab node"................. 113 Figure 80: Dialog "Edit dashboard tab node"................. 114 Figure 81: Dialog "Edit link node" ..................117 Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 286 Figure 121: IP Settings ......................184 Figure 122: List of the possible send and receive assemblies ..........186 Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 287 Portainer.io - Registry access................230 Figure 160: Portainer.io - Registry access................230 Figure 161: portainer.io - Entry page Home ................231 Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 288 Save & Reset security question................272 Figure 180: Boot options question ................... 272 Figure 181: Firmware update in progress................273 Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 289: List Of Tables
List of tables 289/292 List of tables Table 1: List of revisions ....................... Table 2: Positions of the interfaces of NIOT-E-TIJCX-GB-RE..........Table 3: Power supply connector ..................Table 4: Parameters of the serial interface................Table 5: RS-232 D-Sub ......................Table 6: RS-422 D-Sub ......................
Page 290 Attributes concerning the issuer and owner of the certificate zum Zertifikats- Aussteller und Zertifikats-Inhaber ................239 Table 81: Overview use cases....................242 Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...
Page 291 List of tables 291/292 Table 82: Edge Gateway services ..................244 Table 83: Technical data NIOT-E-TIJCX-GB-RE ..............274 Table 84: Technical data PROFINET IO RT IRT Device Protocol.......... 276 Table 85: Technical data EtherNet/IP Adapter protocol ............277 Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) ©...
Page 292: Contacts
Phone: +1 630-505-5301 E-mail: info@hilscher.it E-mail: info@hilscher.us Support Support Phone: +39 02 25007068 Phone: +1 630-505-5301 E-mail: it.support@hilscher.com E-mail: us.support@hilscher.com Edge Gateway | NIOT-E-TIJCX-GB-RE (On-Premise) © Hilscher 2016 – 2019 DOC160402UM07EN | Revision 7 | English | 2019-07 | Released | Public...

hilscher NIOT-E-TIJCX-GB-RE User Manual

User Manual Netiot Edge Gateway

1 Introduction

2 Brief Description

3 Device Drawings

4 Connectors and Mounting

5 Leds

6 Commissioning the Edge Gateway

7 Edge Gateway Manager

8 Control Panel

9 Node-RED - the Wiring Editor

10 Examples for Node-RED

11 Configuring and Using the Fieldbus Node

12 Configuring PROFINET and Defining Signals

13 Configuring Ethernet/Ip and Defining Signals

14 Edge Server

15 Isolated Application Execution with Docker

16 Public Key Infrastructure

17 Firmware Recovery

18 Technical Data

19 Decommissioning, Dismounting and Disposal

20 Appendix

Quick Links

Chapters

Need help?

Questions and answers

Related Manuals for hilscher NIOT-E-TIJCX-GB-RE

Summary of Contents for hilscher NIOT-E-TIJCX-GB-RE