hilscher NIOT-E-TPI51-EN-RE User Manual page 154

Examples for Node-RED
4. Configuring the Inject node:
5. Inserting the fieldbus output node:
Edge Gateway | NIOT-E-TPI51-EN-RE (Connect)
DOC170502UM07EN | Revision 7 | English | 2019-07 | Released | Public
Ø To open the edit dialog, double-click on the Inject node.
Ê The edit dialog for entering the parameters will be displayed.
Ø Select from the Payload list the entry number and enter number 2.
Ø Enter in the field Topic the name of the topic, e.g. Send2.
Ø Enter in the field Name the name for this node, e.g. Send number 2.
Ê All parameters are entered.
Ø Drag a fieldbus output node from the node library and drop it in the
worksheet.
Ê The red triangle the fieldbus node is displayed with indicates that the
node still needs some more parameters which you have to configure in
the following steps.
154/294
© Hilscher 2017 – 2019