hilscher NIOT-E-TPI51-EN-RE User Manual page 146

Examples for Node-RED
5. Selecting the fieldbus interface:
6. Opening the fieldbus configurator (PROFINET configurator):
7. Configuring PROFINET:
Edge Gateway | NIOT-E-TPI51-EN-RE (Connect)
DOC170502UM07EN | Revision 7 | English | 2019-07 | Released | Public
Ø Check whether F displays the entry PROFINET IO Device: Version ....
Ø If it is not displayed, you first have to load the firmware for PROFINET
IO Device in the control panel via the menu entry Network > Field (in
the active mode).
Ø If Fieldbus interface does not yet display the entry PROFINET IO
Device, repeat step 5.
Ø If Fieldbus interface displays the entry PROFINET IO Device, click
Open Fieldbus Configurator.
Ê A new tab with the PROFINET configuration interface will be displayed.
Ø Click IO and Signal configuration in the configuration tree (left).
Ê The page IO Configuration with the list of Available IO items will be
displayed.
Ø At first, double-click the entry 16 send byte (inputs) in the list of
Available IO items.
Ø Then, double-click the entry 16 receive byte (outputs) in the list of
Available IO items.
Ê The list of IO items displays 2 PROFINET modules.
146/294
© Hilscher 2017 – 2019