Introduction 6/263 1 Introduction About the user manual This user manual describes the installation, configuration and functionality of the device NIOT-E-TIB100-GB-RE . List of revisions Revision Date Author Change 2018-03-13 HHe, RGö All sections created. 2018-05-24 Section Node-RED service [} page 68]: All flows are deleted.
OPC UA and MQTT functions address objects in IoT-capable field devices or in the cloud via standardized IoT protocols. The Hilscher netIOT Service offers additional software packets to extend the Edge Gateway base functions by further applications or accesses to specific clouds.
Function Opens the homepage of the netIOT platform in the Internet. Requires a connection to the Internet. Opens the Hilscher homepage in the Internet. Requires a connection to the Internet. Opens legal information concerning the Edge Gateway. Requires a connection to the Internet.
Ø Enter the new administrator password. It must have at least 7 characters. For reasons of safety, Hilscher recommends using significantly more characters. A strong password consists of upper and lower case letters, digits and special characters. A quality indicator in the dialog box evaluates the password.
As standard, Edge Gateways contain a certificate issued by Hilscher that is not on the list of the known authorized issuers of certificates. Due to that, the browser signals an insecure connection and requests the confirmation to continue.
System info Description Hardware ident. Serial number of the Edge Gateway Model name Model designation of the Edge Gateway (NIOT-E-TIB100-GB-RE ) Firmware version Complete version designation of the firmware stored in the Edge Gateway System time Synchronization status of the internal clock of the Edge Gateway.
Page 38
Ø Hilscher creates an individual license file for your Edge Gateway according to the information supplied by you. Ø Hilscher sends this file back to you as an attachment within the answer e-mail. Consequently, this license file has to be transferred into the Edge Gateway as described in section How to transfer a license into the device? [} page 39].
39/263 8.3.2.3 How to transfer a license into the device? Load the individual license file received from Hilscher from your PC into the Edge Gateway. Do the upload as follows: Ø Open the Control Panel in a web browser. Ø Select System > License Manager.
So ,for system supervision and safeguarding correct reaction on error situations, the file logging daemon syslogd (or an improved successor of it) runs on every Linux system,. On the Edge Gateways from Hilscher, the widely-spread logging daemon Syslog-ng is used, which had been developped by BalaBit IT Security Ltd.
The WiFi is deactivated when delivered (factory setting). Figure 40: WiFi (default setting) You can use WiFi only with device variant NIOT-E-TIB100-GB-RE\WF. This page is empty when you use device variant NIOT-E-TIB100-GB-RE and the message “WiFi interface not found” is displayed when opening this page.
The Configuration of the Edge Server [} page 213] 14.1 Function principle The Edge Server is a software component that has been developed by Hilscher and is · executed under the Linux operating system of the Edge Gateway. enables secure and capsuled access from the IT-network to functions ·...
Page 254
Liability disclaimer The hardware and/or software was created and tested by Hilscher Gesellschaft für Systemautomation mbH with utmost care and is made available as is. No warranty can be assumed for the performance or...
Page 255
Additional guarantees Although the hardware and software was developed and tested in-depth with greatest care, Hilscher Gesellschaft für Systemautomation mbH shall not assume any guarantee for the suitability thereof for any purpose that was not confirmed in writing. No guarantee can be granted whereby the...
Page 256
The customer hereby expressly acknowledges that this document contains trade secrets, information protected by copyright and other patent and ownership privileges as well as any related rights of Hilscher Gesellschaft für Systemautomation mbH. The customer agrees to treat as confidential all of the information made available to customer by Hilscher Gesellschaft für...
List of figures 257/263 List of figures Figure 1: Edge Gateway communication structure.............. Figure 2: Positions of the interfaces of NIOT-E-TIB100-GB-RE.......... Figure 3: Dimensions......................10 Figure 4: LED label ......................11 Figure 5: NIOT-E-TIB100-GB-RE LED positions..............15 Figure 6: Default settings of the Ethernet network connectors ..........20 Figure 7: Device label: Hostname..................
List of tables 261/263 List of tables Table 1: List of revisions ....................... Table 2: Positions of the interfaces of NIOT-E-TIB100-GB-RE ..........Table 3: Power supply connector ..................Table 4: Parameters of the serial interface................Table 5: RS-232 D-Sub ......................
Need help?
Do you have a question about the NIOT-E-TIB100-GB-RE and is the answer not in the manual?
Questions and answers