hilscher NIOT-E-TPI51-EN-RE User Manual page 240

Isolated application execution with Docker
15.3.8.2 Set environment variables
15.3.8.3 Define access control
Edge Gateway | NIOT-E-TPI51-EN-RE (Connect)
DOC170502UM07EN | Revision 7 | English | 2019-07 | Released | Public
If you want so,, you can set one or more environment variables within the
area Environment variables , which are valid within the stack to be
created.
Ø To do so, for each variable click exactly once a the dark grey button
add environment variable.
Ê For each environment variable, a new line is created within the area
Environment variables. There, the name of the environment variable
can be specified within field name (left side) and its value within field
value (right side). At the right edge of each line there is a lightred
button. If this button is clicked, the line will be removed with out any
confirmation prompt.
In area Access control, restrictions of access to stacks can be defined. In
general, there are three possibilities:
1. There is no access control at all. To accomplish this option, set the slide
switch right of Enable access control onto the left position. (Then no
additional fields will be displayed within area Access control.)
2. Access is restricted to administrators only. To accomplish this option,
set the slide switch right of Enable access control onto the right
position and then click at the left field Administrators.
3. Access is restricted to specific users and teams. To accomplish this
option, set the slide switch right of Enable access control onto the
right position and then click at the left field Restricted. You can choose
one or multiple users in the selection list Select one or more users
right of Authorized users. Similarly, you can select the user groups in
selection list Select one or more teams right of Authorized teams.
This implies, that users or teams have already been defined.
240/294
© Hilscher 2017 – 2019