Kva/40 Kva Ups - Huawei UPS5000-A-30 kVA User Manual

UPS5000-A-30 kVA & 40 kVA & 80 kVA
User Manual





3.1.4.1 30 kVA/40 kVA UPS

Procedure
Step 1 Visually inspect the UPS appearance for shipping damage. If any shipping damage is founded,
report it to the carrier immediately.
Step 2 Use a pallet truck to transport the UPS to the installation position.
Step 3 Cut and remove the binding tape, as shown in
Figure 3-6 Removing binding tape
Step 4 Remove packing materials, as shown in
Issue 11 (2018-12-10)
Only trained personnel are allowed to move the UPS. Use a pallet truck to transport the
UPS box secured to a wooden support to the installation position.
To prevent the UPS from falling over, secure it to a pallet truck using ropes before moving
it.
To prevent shocks or falls, move the UPS gently. Unpack it and take care to prevent
scratches. Keep the UPS steady during unpacking.
If the UPS installation environment is in poor condition and the UPS will be stored for a
long time after it is unpacked, wrap the UPS with the original plastic coat to prevent dust.
Copyright © Huawei Technologies Co., Ltd.
Figure 3-6.
Figure 3-7.
3 Installation
43