UPS5000-A-30 kVA & 40 kVA & 80 kVA
User Manual
Figure 3-65 EPO NO status
3.2.9 Connecting Communications Cables
Procedure
Step 1 Connect the external network management device to the RS485 port.
Step 2 Connect the network port on a PC to the FE port.
----End
3.3 Installing a Parallel System
3.3.1 Connecting Power Cables
Procedure
Step 1 Ground each UPS.
Step 2 Connect input power cables to each UPS.
Step 3 Connect output power cables to each UPS.
Step 4 Connect battery cables to each UPS.
Step 5 Select a parallel connection method to connect cables to the parallel system based on site
configurations.
Figure
connections for a 1+1 parallel system.
Issue 11 (2018-12-10)
3-66,
Figure 3-67
and
Figure 3-68
Copyright © Huawei Technologies Co., Ltd.
show the typical conceptual diagram and cable
3 Installation
88