Table of Contents
Advertisement
UPS5000-A-(30 kVA-120 kVA)
User Manual
4.1.4 Transportation, Unpacking, and Checking
● Only trained personnel are allowed to move the cabinet. Use a forklift truck to
● To prevent the equipment from falling over, secure it to a forklift truck using
● After placing the equipment in the installation position, unpack it and take care
● After unpacking, check whether the fastening components and removable
● If the installation environment is poor, take dustproof measures (for example,
● If the installation environment is poor, take anti-condensation measures after
4.1.4.1 30 kVA/40 kVA UPS
Procedure
Step 1 Verify that the UPS packing case is not damaged. If any damage is found, report it
to the carrier immediately.
Step 2 Use a forklift to transport the UPS to the installation position.
Step 3 Cut off and remove the binding straps.
Issue 17 (2024-02-21)
NO TE
● The upstream input and downstream output circuit breakers recommended in the table
are for reference only.
● If multiple loads are connected, use recommended specifications for branch circuit
breakers.
● Select proper circuit breakers to protect loads and cables, and cascade them properly to
achieve selective protection.
NO TICE
remove the packed cabinet from the pallet.
ropes before moving it. Move the equipment with caution to avoid bumping or
falling, which may damage the equipment.
to prevent scratches. Keep the equipment stable during unpacking.
components are loose. If they are loose, notify the carrier and manufacturer
immediately.
use a dust cover) after unpacking to prevent equipment damage due to dust
buildup inside it.
unpacking and keep the air conditioner running. Do not store the equipment in
an environment where the temperature and humidity are uncontrollable for a
long period of time. Otherwise, the equipment may be damaged due to
condensation.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Installation and Cable Connection
72
Advertisement
Table of Contents
