Huawei UPS5000-A-30 kVA User Manual page 113

UPS5000-A-30 kVA & 40 kVA & 80 kVA
User Manual
Table 4-8 Local-UPS Load
Item
Single UPS Running
Sout_A, Sout_B, and Sout_C
Pout_A, Pout_B, and Pout_C
Load ratio_A, Load ratio_B,
and Load ratio_C
Table 4-9 Parallel-System Load
Item
Sys. Sout_A, Sys. Sout_B, and
Sys. Sout_C
Sys. Pout_A, Sys. Pout_B, and
Sys. Pout_C
Table 4-10 Environment Monitoring
Item
Ambient temp.
Ambient humid.
Table 4-11 Runtime
Item
Inv. runtime
BPM runtime
Issue 11 (2018-12-10)
System information is not displayed in single UPS mode.
The value takes an integer. For example:
Copyright © Huawei Technologies Co., Ltd.
Description
A single UPS is running.
Output apparent power of each phase on the UPS
Output active power of each phase on the UPS
Load ratio of each phase on the UPS
Description
Output apparent power of each phase in the parallel
system
Output active power of each phase in the parallel system
Description
Temperature measured by the ambient temperature and
humidity sensor. An ambient temperature and humidity
sensor is required. If there is no such sensor, the data
uploaded by the bypass unit is displayed.
Humidity measured by the ambient temperature and
humidity sensor. An ambient temperature and humidity
sensor is required. If there is no such sensor, NA is
displayed.
Description
Time for which the UPS runs in normal mode
Time for which the UPS runs in bypass mode
4 LCD and WebUI
104