Installing A Single Ups; Installing A Ups (400 Kva, 500 Kva, Or 600 Kva Ups) - Huawei UPS5000-E User Manual

UPS5000-E-(400 kVA-800 kVA)
User Manual (50 kVA Power Modules)
Step 2 Install the removed flexible copper bars and battery copper bar components based
on their numbers by referring to screw specifications in
Step 3 Reconnect the removed cables to the system signal interface board in the power
cabinet, and bind the cables. For details, see
Step 4 Check that the power cabinet and bypass cabinet are combined completely and
securely.
Step 5 After checking that cabinets are combined properly, reinstall the side covers and
rear covers.
----End

3.2 Installing a Single UPS

The installation process and cable connection principle of UPSs in standard
configuration and UPSs in full configuration are the same. This section uses UPSs
in full configuration as an example.
When you install the UPS and connect cables, do not step on the front door baffle
plate and the door support at the bottom of the cabinet to prevent paint flake-off
and deformation, as shown in
properly closed.
Figure 3-12 Front door baffle plate

3.2.1 Installing a UPS (400 kVA, 500 kVA, or 600 kVA UPS)

Issue 17 (2023-07-10)
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
Table
Figure 3-12. Otherwise, the front door will not be
3 Installation
Table 3-5 and Table
3-7.
3-6.
84