Table of Contents
Advertisement
NOTE: When seen in either the Active Input or Outputs area of the AV
AV Inputs buttons
Click an AV Input button (1 to 3) to select that input. As the new input is selected, the
summary within the panel changes to reflect the new input and output status.
NOTE: The signal status indicators on the AV input buttons display green when a
Auto-Image button
Clicking the Auto-Image button starts a one-time Auto-Image on the currently selected
input.
Freeze button
Clicking the Freeze button freezes the current displayed video frame for the currently
selected input. When the button is blue the image is frozen. Click the button again to
unfreeze the image.
Audio, Video, and Sync Mute buttons
•
•
•
•
To unmute any signal, click the appropriate button. The button reverts to the default color,
indicating the signal has been unmuted.
Configuration Pages
The configuration pages contain options for input and output configuration, EDID
management, image settings, image size and position, annotation settings, OSD settings,
and device settings. Each page is accessible via the global navigation bar (see figure 47).
Figure 47.
Controls panel:
•
An open lock icon indicates that an input or output is not HDCP-encrypted.
•
A closed lock with a check mark icon indicates that an input or output is HDCP-
encrypted.
signal is present on the corresponding input (even if that input is not selected) or
gray when there is no signal present.
Click the Audio Mute button to globally mute only the audio. The button turns red.
Click the Video Mute button to mute only the video signal. The button turns red
Click the AV Mute button to mute both video and audio simultaneously. The button
turns red, along with the Video Mute and Audio Mute buttons.
Click the Sync Mute button to mute video and sync. The button turns red along with
the Video Mute button.
Global Navigation Bar
Annotator 300 • Product Configuration Software
80
Advertisement
Table of Contents
