Table of Contents
Advertisement
Configuration Pages
The configuration pages contain options for input and output configuration, EDID
management, image settings, image size and position, annotation settings, OSD settings,
and device settings. Each page is accessible via the global navigation bar.
Figure 39.
Input and Output Configuration Page
Click the
configuration and output configuration.
Input Configuration panel
The Input Configuration panel consists of user configurable fields for each input. These
include input signal type, audio format, aspect ratio, automatic Auto-Image, Auto Memory,
HDCP Authorized status, and Film Detect.
Figure 40.
Signal type
From the
Detect
HDMI/DVI, and for input 3 DisplayPort are the only available signal types.
Audio Format
From the
3, from
Aspect ratio
From the
•
•
Global Navigation Bar
Input/Output Config
Input Configuration panel
drop-down menu, select the signal type for input 1 from
Signal Type
(default)
,
, RGB
Auto-YUV
drop-down menu, select the audio format type for inputs 2 and
Audio Format
and
None, LPCM-2ch,
drop-down menu select
Aspect Ratio
— Scales the input signal to fill the entire video output.
Fill
— Follows the signal aspect ratio, with respect to the current output
Follow
resolution setting. Black letter box or pillar box bars may be applied for aspect ratio
compensation.
icon to open this page. It contains panels for input
,
,
, and
RGBcvS
S-Video
Composite
. For input 1 no audio is available
Full Digital
or
Fill
Follow
Annotator 300 • Product Configuration Software
Auto
. For input 2
.
76
Advertisement
Table of Contents
