Function Specification List; List Of Supported Protocols; Target Pool For Each Function/Volume List; Table 60 List Of Supported Protocols - Fujitsu ETERNUS DX500 S4/DX600 S4 Design Manual

A.

Function Specification List

This appendix shows the combinations of functions that can be executed at the same time and the targets for
each function.

List of Supported Protocols

Table 60 List of Supported Protocols

Item
Operation mode
ETERNUS Web GUI
ETERNUS CLI
SMI-S
NTP (time)
E-mail
SNMP
Event notification and audit
log sending
KMIP (key management)
Ping
Network address
Routing
File sharing (common)
File sharing (UNIX/Linux)
File sharing (Windows)
Authentication
¡: Supported ´: Not supported

Target Pool for Each Function/Volume List

This section describes the functions which can be performed on RAID groups, pools, and volumes.
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic)
LAN for Operation
Management
1000BASE-T/100BASE-
TX/10BASE-T
http
¡
https (SSL v3, TLS) ¡
SSH v2
¡
telnet
¡
ftp (client)
¡
http / https ¡
SLP
¡
NTP v4
¡
SMTP (Client)
¡
SNMP v1, v2c, v3
¡
Syslog ¡
SSL
¡
ICMP
¡
IPv4, IPv6 ¡
´
RIP v1, v2, RIPng
´
FTP/FXP
NFSv2, v3, v4.0 ´
´
CIFS (SMB1.0, 2.0, 3.0)
´
Kerberos v5
RADIUS
¡
´
CHAP
210
Copyright 2019 FUJITSU LIMITED
iSCSI (SAN) Ethernet (NAS)
10GBASE-SR/ 10GBASE-SR/
10GBASE-CR/ 10GBASE-CR/
1000BASE-T 1000BASE-T
´ ´
´ ´
´ ´
´ ´
´ ´
´ ´
´ ´
´ ´
´ ´
´ ´
´ ´
´ ´
¡ ¡
¡ ¡
´
¡
´
¡
´
¡
´
¡
´
¡
´ ´
´
¡
P3AM-7722-25ENZ0