Page 5
Combinations of Functions That Are Available for Simultaneous Executions............214 Number of Processes That Can Be Executed Simultaneously ................216 Capacity That Can Be Processed Simultaneously ....................216 FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Page 9
Deduplication/Compression Setting for TPPs Where the Target Volumes Can Be Created .......116 Table 42 Target Deduplication/Compression Volumes of Each Function ...............119 Table 43 Storage Cluster Function Specifications ....................126 FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Page 10
Combinations of Functions That Can Be Executed Simultaneously (1/2) ..........214 Table 62 Combinations of Functions That Can Be Executed Simultaneously (2/2) ..........214 FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Page 11
Preface Fujitsu would like to thank you for purchasing the FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 (hereinafter collectively referred to as ETERNUS DX). The ETERNUS DX is designed to be connected to Fujitsu servers (Fujitsu SPARC Servers, PRIMEQUEST, PRIMERGY, and other servers) or non-Fujitsu servers.
Page 12
Indicates information that you need to observe when using the ETERNUS storage system. Make sure to read the information. Indicates information and suggestions that supplement the descriptions included in this manual. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Page 13
- Do not use alcohol or other solvents to clean the ETERNUS storage system. Warning layout ribbon FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Power control functions that are used to link power-on and "Remote Power Operation (Wake On LAN)" (page 89) power-off operations with servers and perform scheduled opera- tions. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
When Nearline SAS disks that have 6TB or more are used, the available RAID levels are RAID0, RAID1, RAID6, and RAID6-FR. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
The data is stored on two duplicated drives at the same time. If one drive fails, other drive continues operation. Figure 2 RAID1 Concept Data writing request Drive#0 Drive#1 FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Parity for data I to L: P I, J, K, L Parity for data M to P: P M, N, O, P FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
I, J, K, L Parity for data M to P: P1 and P2 M, N, O, P M, N, O, P FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
◎: Very good ¡: Good △: Reasonable ´: Poor *1: Performance may differ according to the number of drives and the processing method from the host. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
*1: "N" is the number of RAID6 configuration sets. For example, if a RAID6 group is configured with "(3D+2P) ´2+1HS", N is "2". FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Table 5 shows the user capacity for each drive. The supported drives vary between the ETERNUS DX500 S4/DX600 S4 and the ETERNUS DX500 S3/DX600 S3. For details about drives, refer to "Overview" of the currently used storage systems. Table 5 User Capacity per Drive...
*3: This value is for a 15.36TB SSD RAID1+0 (4D+4M) configuration in the ETERNUS DX500 S3/DX600 S3. *4: This value is for a 30.72TB SSD RAID1+0 (4D+4M) configuration in the ETERNUS DX500 S4/DX600 S4. *5: For details on the number of configuration drives for each RAID level and recommended configurations,...
For availability of expansion, displacement, and concatenation for each volume, refer to "Target Vol- umes of Each Function" (page 212). FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
After a volume is created, formatting automatically starts. A server can access the volume while it is being for- matted. Wait for the format to complete if high performance access is required for the volume. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
This is available for any RAID group. When multiple hot spares are installed, the most appropriate drive is au- tomatically selected and incorporated into a RAID group. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
If different drive types or capacities are mixed, the recommended action is to install a hot spare for each dif- ferent drive type or capacity on each path. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
The T10-DIF function can be used when connecting with HBAs that support T10-DIF with an FC interface. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Page 32
The T10-DIF function can be enabled only in the Standard volume. • LUN concatenation cannot be performed for volumes where the T10-DIF function is enabled. • FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Drives that are stopped by Eco-mode are checked when the drives start running again. The Maintenance Operation privilege is required to set detailed parameters. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
However, it should be noted that when the priority is high and a Redundant Copy operation is performed for a RAID group, the performance (throughput) of this RAID group may be reduced. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
However, it should be noted that when the priority is high and a rebuild operation is performed for a RAID group, the performance (throughput) of this RAID group may be reduced. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
For a normal rebuild process that is performed when the reserved space is already being used and the second drive fails, a copyback is performed according to the settings of the Copybackless function. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
If the Copybackless function is enabled, the drive that is replaced with the failed drive cannot be installed in the prior RAID group configuration. This should be taken into consideration when enabling or disabling the Copybackless function. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
RAID group configuration drive and copyback starts. The copybackless setting can be enabled or disabled until the drive is replaced. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Page 40
After the settings are changed, the ETERNUS DX does not need to be turned off and on again. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Data in physically allocated areas are checked in blocks and unnecessary areas (areas where 0 is allocated to all of the data in each block) are released to unallocated areas. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
*2: The maximum pool capacity is the capacity that combines the FTSP capacity and the Thin Provisioning Pool capacity in the ETERNUS DX. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
The capacity of a TPV can be expanded after it is created. For details on the number of TPVs that can be created, refer to "Volume" (page 26). FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
TPV from an OS or an application that does not support Advanced For- mat. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
RAID group. In addition, when the capacity of a TPP is expanded, the physical capacity is unevenly allocated among the newly added RAID group and the existing RAID groups. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Page 47
While TPV balancing is being performed, the balancing level may become lower than before balancing was • performed if the capacity of the TPP to which the TPVs belong is expanded. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
For details on the functions that can be executed simultaneously, refer to "Combinations of Functions That Are Available for Simultaneous Executions" (page 214). FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
By using the Automated Storage Tiering function, installation costs can be reduced because Nearline SAS disk, which maintain performance, can be used. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Flexible Tier Sub Pools (Flexible Tier Pools: FTRP). A volume which is used by the Flexible Tier is referred to as the Flexible Tier Volume (FTV). FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
The maximum capacity of the Flexible Tier Sub Pool 3,072TB (*2) 8,192TB (*2) Total capacity of the Flexible Tier Volume 3,072TB 8,192TB FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Make sure to add drives before free space in the FTRP runs out, and add FTSP capacity from ETERNUS SF Storage Cruiser. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
The FTRP capacity that can be used for VVOLs differs from the maximum Thin Provisioning Pool capacity. For details, refer to "VMware VVOL" (page 135). FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Deduplication/Compression Volumes, or volumes that are configured with SSDs. The Extreme Cache function may improve random I/O. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Specify one to four SSDs to use as an Extreme Cache Pool for each controller. 400GB SSDs (MLC SSDs) can be used for the ETERNUS DX500 S4/DX600 S4. Value SSDs cannot be used. SSDs with a capacity of 400GB, 800GB, and 1.6TB can be used for the ETERNUS DX500 S3/DX600 S3.
The RAID level for RAID groups can be changed. Adding drives while changing is also available. This is used to convert the RAID level of all the volumes belonging to a given RAID group. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Page 58
Distributing a single volume to multiple RAID groups makes I/O access from the server more efficient and im- proves the performance. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
A volume is changed to the appropriate type for the migration destination RAID groups or pools (TPP and FTRP). FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
During RAID Migration, the access performance for the RAID groups that are specified as the RAID Migration source and RAID Migration destination may be reduced. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
LDE may not be available when other functions are being used in the ETERNUS DX or the target RAID group. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
LUN Concatenation is a function to expand a volume capacity by concatenating volumes. Up to 16 volumes with a minimum capacity of 1GB can be concatenated. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
For details on the functions that can be executed simultaneously, refer to "Combinations of Functions That Are Available for Simultaneous Executions" (page 214). FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Page 64
OS or an application that does not support Advanced Format. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
WSV, the write performance may be reduced when accessing the cre- ated WSVs from an OS or an application that does not support Advanced Format. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
AES (*1) or Fujitsu Original Encryption can be selected as the encryption method. The Fujitsu Original Encryp- tion method uses a Fujitsu original algorithm that has been specifically created for ETERNUS DX storage sys- tems.
Once the key is registered, the key cannot be changed or deleted. The common key is used to authenticate RAID groups when key management server linkage is not used. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Fujitsu Original Encryption method. The Fujitsu Original Encryption method that is based on AES technology uses a Fujitsu original algorithm that has been specifically created for ETERNUS DX storage systems. The Fujitsu Origi- nal Encryption method has practically the same security level as AES-128 and the conversion speed for the Fujit- su Original Encryption method is faster than AES.
Key Management Server Linkage Key creation In the storage system Key server Key storage In the storage system Key server FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
For Dedicated Hot Spares, an authentication key can be specified according to the setting of the key group for the target RAID group when a Dedicated Hot Spare is registered. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Page 71
Rebuilding and performing copy back (when using Global Hot Spares) Performing a redundant copy (when using Global Hot Spares) Turning on the disk motor with the Eco-mode FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
The menu that is displayed after logging on varies depending on the role that is added to a user account. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
The function categories for the roles cannot be changed. • A role must be assigned when creating a user account. • FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
When the primary RADIUS server failed to authenticate, the secondary RADIUS server attempts to authenticate. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Page 75
When using RADIUS authentication, if the role that is received from the server is unknown (not set) for the • device, RADIUS authentication fails. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
↓ the process details, Log out and the process results Audit log System administrator ETERNUS DX Syslog server FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
RAID groups that are registered as an REC Disk Buffer • TPPs where the Deduplication/Compression function is enabled • FTSP • FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
*1: The monitoring time period to check if there is no access to a disk for a given length of time and stop the drive. *2: Self Encrypting Drives (SEDs) are also included. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Page 79
The motor starts rotating The disk stops 10 min after the scheduled operation 10 min before the scheduled operation FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
ETERNUS DX storage systems ETERNUS SF Storage Cruiser Collects power consumption and temperature data for each storage system. Server FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Password authentication and client public key authentication are supported as authentication methods for SSH. For details on supported client public key types, refer to "User Authentication" (page 74). FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Volume Performance Information for the Advanced Copy Function • Read IOPS (the read count per second) Write IOPS (the write count per second) • FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Page 83
If performance monitoring is started from ETERNUS Web GUI or ETERNUS CLI, the process can be stopped • from ETERNUS SF Storage Cruiser. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
The ETERNUS DX supports "SMTP AUTH" and "SMTP over SSL" as user authentication. A method can be selected from CRAM-MD5, PLAIN, LOGIN, or AUTO which automatically selects one of these methods. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
ETERNUS DX, and prevents known errors from occurring. Firmware can also be registered manually. However, NAS system firmware is not automatically downloaded. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Page 86
Using the ETERNUS Multipath Driver to monitor the storage system by host senses is recommended. Sense codes that cannot be detected in a single configuration can also be reported. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Figure 47 Device Time Synchronization NTP server Date and Time yyyy xx:xx:xx Time Zone + 09.00 Daylight Saving Time ETERNUS DX FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
ETERNUS DX. Figure 48 Power Synchronized Unit Server Server for server for server Power synchronized unit ETERNUS DX FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
ETERNUS Web GUI or ETERNUS CLI can be used to turn off the power of an ETERNUS DX remotely. Figure 49 Wake On LAN Administration terminal Wake On LAN utility Packet transmission ETERNUS DX FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
A copy is executed for each LUN. With ETERNUS SF AdvancedCopy Manager, a copy can also be executed for each logical disk (which is called a partition or a volume depending on the OS). FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Page 92
I/O access error message is output to the server log message and other destinations. To prevent error messages from being output, consider using other monitoring methods. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Synchronizing the data copy with the data that is written to the copy source guar- antees the contents of the copy source and copy destination at the time of completion. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Page 94
Consistency mode, this mode is used to change the transfer mode to transfer data that has not been transfer- red or to resume transfers. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Page 95
When the ETERNUS DX90, the ETERNUS DX400 series, or the ETERNUS DX8000 series is used as the copy • destination, REC cannot be performed between encrypted volumes and unencrypted volumes. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
2 must be included in the copy destination area for copy session 1. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
2TB. If the copy size is 2TB or larger, perform the following operations instead. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
*2: When copy session 1 uses the REC Consistency mode, the data transmission sequence of copy session 1 is guaranteed, but the data transmission sequence of copy session 2 is not guaranteed. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
"Stripe Depth 256KB" cannot be specified for a "RAID5 (8D+1P)" configuration that is used for TPPs and • FTSPs. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
If an assigned controller is disconnected for any reason, the assigned CM is replaced by another controller. After the disconnected controller is installed again and returns to normal status, this controller becomes the assigned CM again. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Drive#6 Drive#7 Drive#8 Drive#9 Drive#10 Drive#11 *1: The capacity of the user data area is equivalent to four drives. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Duplicate data blocks are removed Compression: Data blocks are compressed A B C D E F Target volume for deduplication/compression ETERNUS DX FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Compression: Data blocks are compressed A B C D A B E F Target volume for compression ETERNUS DX FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
If I/Os are issued to the Deduplication/Compression Volumes, the CPU usage rate increases. The performance • of non-Deduplication/Compression Volumes may also be affected. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Select the TPP where the Deduplication/Compression function is enabled, and create Deduplication/Compres- sion Volumes (TPVs) in the selected TPP. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
TPP where the volume is created. TPVs where the Deduplication/Compression function is enabled and disabled can exist together within each TPP. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Page 117
If a failure occurs in a RAID group configuring the TPP, or a bad sector occurs in the DEDUP_SYS Volume or the DEDUP_MAP Volume, the data of all the Deduplication/Compression Volumes in the TPP may be de- leted. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
In addition, the bandwidth of the remote lines might not be fully utilized in some cases. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
*4: Encryption can be performed by creating a volume in the encrypted pool, or migrating a volume to an en- crypted pool. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
When servers are duplicated and connected using a cluster configuration to share a single ETERNUS DX • among multiple servers, cluster control software is required. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
B, which has priority, significantly increases, the required a high priority, can be reduced performance for B cannot be maintained FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
The maximum number of LUNs that can be mapped to the LUN group varies depending on the connection • operation mode of the host response settings. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
For Storage Cluster settings, create TFO groups that include target volumes (TFOV), and specify the connection configuration and the policy for each group. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Table 43 Storage Cluster Function Specifications Item Specifications Number of connectable storage systems Business server connections Switch connections only FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Page 127
For details on the required environment for the Storage Cluster (OS, HBA, multipath driver, and cluster soft- • ware), refer to "Support Matrix". FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
The capacity of a volume that is to be specified as the migration destination area must be larger than the migra- tion source volume capacity. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Page 129
Make sure to delete the migration path after Storage Migration is complete. • FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
RAID Migration to read data from the migration target volume in the external storage system and write data to the migration destination volume in the local storage system. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Page 131
Make sure to delete the Non-disruptive Storage Migration License after the Non-disruptive Storage Migra- • tion is complete. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
VVOL VVOLs are logical volumes that are created in FTRPs. Multiple VVOLs can be created in a storage container. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
To use VMware vSphere Replication, the controller firmware version of the ETERNUS DX must be V10L80 or • later. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
- Backup and restore of virtual machines - Data transfer ETERNUS DX Veeam Storage Integration software ETERNUS DX software (setup tool) FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Page 139
In such configuration, an error might occur at the jobs that are in conflict with each other when being exe- cuted from multiple Veeam Backup & Replication. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Deduplication/Compression Volumes (TPVs) are not supported. Copy destination TPVs/FTVs are automatically created when snapshots are created with Veeam Backup & • Replication. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
ETERNUS DX and assigning created volumes to VM instances can be performed via an Open- Stack standard interface (Horizon). FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Host Interface This section describes each host interface. The supported host interfaces vary between the ETERNUS DX500 S4/DX600 S4 and the ETERNUS DX500 S3/DX600 S3. For details about host interfaces, refer to "Overview" of the currently used storage systems. When switches are used, zoning should be set for the switches to ensure the security of data.
Fabric is supported as a connection topology. The transfer rate is 10Gbit/s. When using an FCoE interface, con- nect the ETERNUS DX to the FCoE switch. Direct connections to servers are not supported. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Figure 87 Single Path Connection (When a SAN Connection Is Used — Switch Connection) Server Server Server Switch Port Port Port Port CM#0 CM#1 ETERNUS DX FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Figure 89 Multipath Connection (When a SAN Connection Is Used — Switch Connection) Server Server Server Switch Switch Port Port Port Port CM#0 CM#1 ETERNUS DX FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
The connection interface is FC or iSCSI. In addition, only the switch connection topology is supported. Direct con- nections are not supported. For more details on Storage Cluster, refer to "Storage Cluster" (page 125). FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
ETERNUS DX/AF ETERNUS DX/AF WAN (IP line) Copy source Copy destination FC-RA FC-RA Digital service unit Digital service unit FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
The IPsec function is not supported for iSCSI interfaces. Select a LAN switch with the IPsec function to use the IPsec function to perform a remote copy. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
*2: This cannot be connected to a remote interface (iSCSI-RA) of the ETERNUS DX S2 series. Use a host inter- face. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
(RMT Port)" (page 155) and use the RMT ports to connect to the remote support center via a different network. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
The IP addresses of the Master CM and the Slave CM are set. CM#0 CM#1 Controller enclosure ETERNUS DX FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Sending ETERNUS DX logs to the AIS Connect server • Remote access from the AIS Connect server to the ETERNUS DX • FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
The sections that are shown below explain how to set the ETERNUS DX for remote support. For details on the settings, refer to "Configuration Guide (Web GUI)". FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
CM#0 CM#1 Remote support center Controller enclosure ETERNUS DX Different LANs are used for MNT ports and RMT ports. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Master CM and the other CM is called the Slave CM. When an error occurs in the Master CM or LAN, the Master CM is switched automatically. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
The IP address of the Slave CM is ETERNUS DX used to switch the Master CM and display the status of the ETERNUS DX. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Page 161
For details on the port numbers for the Storage Foundation Software ETERNUS SF, refer to the manual of each Storage Foundation Software ETERNUS SF. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Configurations where the controller enclosure is powered by the UPS while the drive enclosures are powered di- rectly from AC are not supported. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
RS232C cable An instruction is issued to turn on/off the ETERNUS DX when AC output/no AC output is detected. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Page 164
Shutdown of all the server UPS units Issuance of command to turn off the ETERNUS DX from the power synchronized unit ETERNUS DX shutdown FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
ETERNUS DX startup *1: The server must be set to suspend server OS startup until the ETERNUS DX startup is complete. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Powering on sequence A power on instruction is issued to the ETERNUS DX via the LAN. ETERNUS DX startup FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Storage area for firmware • FAN: Fan Unit Cooling fan unit Switch PCI Express switch IOC: I/O Controller Controller to control I/O FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Page 169
Board that is located between the front of the enclosure and the rear of the enclosure (the controller (CM) or I/O module (IOM) side) DPSU: Drive Enclosure Power Supply Unit Power supply unit for drive enclosures FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Page 171
Board that is located between the front of the enclosure and the rear of the enclosure (the controller (CM) or I/O module (IOM) side) DPSU: Drive Enclosure Power Supply Unit Power supply unit for drive enclosures FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
DI (IN) DI (IN) DI (OUT) DI (OUT) DI (OUT): Drive interface (OUT) port DI (IN): Drive interface (IN) port FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
DI (IN) DI (IN) DI (OUT) DI (OUT) DI (OUT): Drive interface (OUT) port DI (IN): Drive interface (IN) port FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
In the ETERNUS DX600 S4/DX600 S3, eight cache memory modules can be installed for each controller and 16 cache memory modules can be installed for each storage system. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Only one Memory Extension can be installed for each ETERNUS DX. Select an appropriate Memory Extension according to the cache memory capacity used for the SAN environment. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Installable PFM capacity Up to 20TB 1.4TB 20TB or more 2.8TB 40TB or more 4.2TB 60TB or more 5.6TB FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Installing the Unified License requires the Memory Extension and the Ethernet host interface. Unified kit/Unified License cannot be installed if the Deduplication/Compression function is used. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
For example, if twenty 2.5" type drive enclosures are installed in a ETERNUS DX500 S4/DX500 S3, up to two 3.5" type drive enclosures can be added. However, a high-density drive enclosure cannot be added. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Nearline SAS disks are high capacity cost effective disks for data backup and archive use. Nearline SAS disks can store information that requires a low access rate at a reasonable speed more cost effectively than SAS disks. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Page 183
Note that the product's actual capacity of a Value SSD differs from the capacity that is displayed in ETERNUS Web GUI and ETERNUS CLI. For example, 2.00TB is displayed for a 1.92TB Value SSD. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
For details on the number of required hot spares, refer to "■ Number of Installable Hot Spares" (page 29) "Hot Spares" (page 28). FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Standard Installation Rules Drive This section explains the installation rules for drives. The supported drives vary between the ETERNUS DX500 S4/DX600 S4 and the ETERNUS DX500 S3/DX600 S3. For details about drives, refer to "Overview" of the currently used storage systems. ■...
Install drives in the slots of a high-density drive enclosure from Slot#0 to Slot#59 in ascending order according to the installation order. Figure 123 Drive Installation Diagram for High-Density Drive Enclosures Rear view IOM/PSU/FEM IOM/PSU/FEM Front view FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Page 197
2.5" SAS self encrypting disks (1.2TB/10krpm) 2.5" SAS self encrypting disks (2.4TB/10krpm) 2.5" Nearline SAS disks (1TB/7.2krpm) 2.5" Nearline SAS disks (2TB/7.2krpm) FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
According to the installation order, install drives in the slots of a drive enclosure from Slot#0 to Slot#23 in as- cending order. Figure 124 Installation Diagram for 2.5" Drives FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
The Maintenance Operation policy is required to sanitize the SSDs. Also, change the status of the ETERNUS DX to the maintenance status. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Target Pool for Each Function/Volume List This section describes the functions which can be performed on RAID groups, pools, and volumes. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
*8: If an FTRP is deleted, the FTSP, which is included in the FTRP, is also deleted. The FTRP needs to be deleted to delete the FTSP. *9: This operation is possible in units of parent pools (FTRPs). FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Page 213
SnapOPC/SnapOPC+ is also set as the copy source (Cascade Copy/restore). *15: This is part of the cache parameter settings, and cannot be configured in the units of volumes. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
Page 215
*13: EC/REC can be performed (The motor-off state of Eco-mode will be stopped). OPC/QuickOPC/SnapOPC/SnapOPC+ cannot be performed (the ETERNUS DX returns an error). FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED...
The total capacity of TPV balancing, FTRP balancing, RAID Migration, and Flexible Tier Migration processes that • can be performed at the same time is 128TB. FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic) Copyright 2019 FUJITSU LIMITED P3AM-7722-25ENZ0...
Page 217
However, Fujitsu shall assume no responsibility for any operational problems as the result of errors, omissions, or the use of information in this manual. Fujitsu assumes no liability for damages to third party copyrights or other rights arising from the use of any information •...