Logical Device Expansion; Figure 33 Logical Device Expansion (When Expanding The Raid Group Capacity); Figure 34 Logical Device Expansion (When Changing The Raid Level) - Fujitsu ETERNUS DX500 S4/DX600 S4 Design Manual

Table of Contents

Advertisement

2.
Basic Functions
Optimization of Volume Configurations

Logical Device Expansion

Logical Device Expansion (LDE) allows the capacity of an existing RAID group to be dynamically expanded by
changing of the RAID level or the drive configuration of the RAID group. When this function is performed, drives
can be also added at the same time. By using this LDE function to expand the capacity of an existing RAID
group, a new volume can be added without having to add new RAID groups.
Expand the RAID group capacity (from RAID5(3D+1P) g RAID5(5D+1P))

Figure 33 Logical Device Expansion (When Expanding the RAID Group Capacity)

RAID5 (3D+1P) 600GB x 4
Unused 600GB x 2
Change the RAID levels (from RAID5(3D+1P) g RAID1+0(4D+4M))

Figure 34 Logical Device Expansion (When Changing the RAID Level)

RAID5 (3D+1P) 600GB x 4
Unused 600GB x 4
LDE works in terms of RAID group units. If a target RAID group contains multiple volumes, all of the data in the
volumes is automatically redistributed when LDE is performed. Note that LDE cannot be performed if it causes
the number of data drives to be reduced in the RAID group.
In addition, LDE cannot be performed for RAID groups in which the following conditions apply.
RAID groups that belong to TPPs or FTRPs
The RAID group that is registered as an REC Disk Buffer
RAID groups in which WSVs are registered
RAID groups that are configured with RAID5+0 or RAID6-FR
LDE may not be available when other functions are being used in the ETERNUS DX or the target RAID group.
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic)
LUN0
Expansion
Expands the capacity
by adding two drives
LUN0
Expansion
Expands the capacity by
adding four drives and
changes the RAID level
Copyright 2019 FUJITSU LIMITED
RAID5 (5D+1P) 600GB x 6
LUN0
RAID1+0 (4D+4M) 600GB x 8
LUN0
LUN0
61
P3AM-7722-25ENZ0

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eternus dx500 s3/dx600 s3

Table of Contents