5.
Hardware Configurations
Recommended RAID Group Configuration
■
Double Striping Configuration with Distributed Parity
RAID5+0(2D+1P) ´2 is used in the following examples to explain how to install drives that are configured for
double striping with distributed parity.
The drive number is determined by the DE-ID of the enclosure and the slot number in which the drive is instal-
led. Drives are divided into two redundant set groups in ascending order of drive numbers.
Example 4: Drives are installed in two different drive enclosures
Figure 129 Drive Combination 4
A
D
E
C
Redundancy Group 1
:
Redundancy Group 2
:
Example 5: Drives are installed in three different drive enclosures
Figure 130 Drive Combination 5
A
D
B
E
C
F
Redundancy Group 1
:
Redundancy Group 2
:
FUJITSU Storage ETERNUS DX500 S4/DX600 S4, ETERNUS DX500 S3/DX600 S3 Hybrid Storage Systems Design Guide (Basic)
DE#00
B
DE#10
F
DE#00
DE#10
DE#20
202
Copyright 2019 FUJITSU LIMITED
P3AM-7722-25ENZ0